曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

┗━━━━━━━━━━━━━━━━┻━━━━━━━━━━━━━━┻━━━━━┻━━━━━┛
ECAM UPPER DISPLAY
0
FLAP indication
The "FLAP" legend appears when the slats or the flaps are not fully retracted.
- The legend is white when the slats and flaps are in the selected position.
- The legend is cyan when the slats and flaps are in transit.
- The legend is amber if :
    Both relevant hydraulic systems go down (except on the ground with engines
    stopped).
    The wingtip brakes are on.
    There is a fault in the slats or flaps.
(~ Flap lever position
The legend "0," "1 + F,  1," "2," "3," or "FULL" appears.
- The legend is green when the slats and flaps are in the selected position. "0" is not
   displayed when the aircraft attains the clean configuration.
- The legend is cyan when the slats and flaps are in transit.
   The legend "S (F) LOCKED" appears in amber, associated with an ECAM caution,
   when the wingtip brakes are applied or when the system detects a non-alignment
   between two flaps.
   The legend "A-LOCK" pulses in cyan when the slat alpha/speed-lock function is active.
CCM ALL
┏━━━━━━━━━━━━━━━━┳━━━━━━━━┳━━━━━━━━━┓
┃I  -~ A318                      ┃FLIGHT CONTROLS ┃1.27.50     P 7   ┃
┃  .*,,.8, ,, ~L,~ A319          ┃                ┃                  ┃
┃ Lli,~ A320                     ┃                ┃                  ┃
┃                                ┃                ┣━━━━┳━━━━┫
┃      A~7-~'M" A321             ┃FLAPS AND SLATS ┃SEQ 001 ┃REV 23  ┃
┃   FLIGHT CREW OPERATING MANUAL ┃                ┃        ┃        ┃
┗━━━━━━━━━━━━━━━━┻━━━━━━━━┻━━━━┻━━━━┛
     Position indexes
These white points indicate that the slats and flaps are in a selectable position. They do
not appear when the aircraft is in the clean configuration.
(~ Slat and flap position
These green triangles indicate the actual position of the slats and flaps.
They change to amber if :
- Both relevant hydraulic systems go down, unless the aircraft is on the ground with
   both engines stopped.
- The wingtip brakes are on.
- There is a fault in the slats or flaps.
(~ Selected surface position
~
These blue triangles indicate the position the pilot has selected.
(With the current standard display management computer, the blue triangles may
disappear before the slats and flaps are all completely in the selected position).
S and F indications
The "S" and "F" normally appear in green. They become amber if :
- Both relevant hydraulic systems go down, unless the aircraft is on the ground with
   both engines stopped.
- The wingtip brakes are on.
- There is a fault in the slats or flaps.
CCM ALL
┏━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━┳━━━━━━━━━━━┓
┃                                ┃                              ┃1.27.50     P 8       ┃
┃                                ┃                              ┣━━━━━┳━━━━━┫
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：AIRBUS A320 Flight Crew Operating Manual3(116)