曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

planning phase, investigate the departure airport’s
method for receiving an instrument clearance. You can
contact the Automated Flight Service Station (AFSS)
on the ground by telephone and they will request your
clearance from ATC. Typically, when a clearance is
given in this manner, the clearance includes a void time.
You must depart the airport before the clearance void
time; if you fail to depart, you must contact ATC by a
specified notification time, which is within 30 minutes
of the original void time. After the clearance void time,
your reserved space within the IFR system is released
for other traffic.
There are several other ways to receive a clearance at a
non-towered airport. If you can contact the AFSS or
ATC on the radio, you can request your departure
clearance. However, these frequencies are typically
congested and they may not be able to provide you
with a clearance via the radio. You also can use a
Remote Communications Outlet (RCO) to contact an
AFSS if one is located nearby. Some airports have
licensed UNICOM operators that can also contact ATC
on your behalf and in turn relay your clearance from
ATC. You are also allowed to depart the airport VFR if
conditions permit and contact the controlling authority
and request your clearance in the air. As technology
improves, new methods for delivery of clearances at
non-towered airports are being created.
GROUND COMMUNICATIONS OUTLETS
A new system, called a Ground Communication
Outlet (GCO), has been developed in conjunction with
the FAA to provide pilots flying in and out of non-towered airports with the capability to contact ATC and
AFSS via Very High Frequency (VHF) radio to a telephone connection. This lets pilots obtain an instrument
clearance or close a VFR/IFR flight plan. You can use
four key clicks on your VHF radio to contact the nearest
ATC facility and six key clicks to contact the local
AFSS, but it is intended to be used only as a ground
operational tool. A GCO is an unstaffed, remote controlled ground-to-ground communication facility that is
relatively inexpensive to install and operate.
Installations of these types of outlets are scheduled at
instrument airports around the country.
GCOs are manufactured by different companies including ARINC and AVTECH, each with different operating
characteristics but with the ability to accomplish the same
goal. This latest technology has proven to be an incredibly useful tool for communicating with the appropriate
authorities when departing IFR from a non-towered
airport. The GCO should help relieve the need to use
the telephone to call ATC and the need to depart into
marginal conditions just to achieve radio contact. GCO
information is listed on airport charts and instrument
approach charts with other communications frequencies. Signs may also be located on an airport to notify
you of the frequency and proper usage.
OBSTACLE AVOIDANCE
Safety is always the foremost thought when planning
and executing an IFR flight. As a result, the goal of all
departure procedures is to provide a means for departing
an airport in the safest manner possible. It is for this reason that airports and their surroundings are reviewed and
documented and that procedures are put in place to prevent flight into terrain or other man-made obstacles. To
aid in the avoidance of obstacles, takeoff minimums and
departure procedures use minimum climb gradients and
“see and avoid” techniques.
CLIMB GRADIENTS AND CLIMB RATES
You are required to contact ATC if you are unable to comply with climb gradients and climb rates. It is also
expected that you are capable of maintaining the climb
gradient outlined in either a standard or non-standard SID
or ODP. If you cannot comply with the climb gradient in
the SID, you should not accept a clearance for that SID. If
you cannot maintain a standard climb gradient or the
climb gradient specified in an ODP, you must wait until
you can depart under VMC.
Climb gradients are developed as a part of a departure
procedure to ensure obstacle protection as outlined in
TERPS. Once again, the rate of climb table depicted in
Figure 2-18, used in conjunction with the performance
specifications in your airplane flight manual (AFM), can
help you determine your ability to comply with climb
gradients.
SEE AND AVOID TECHNIQUES
Meteorological conditions permitting, you are
required to use “see and avoid” techniques to avoid
traffic, terrain, and other obstacles. To avoid obstacles during a departure, the takeoff minimums may
2-27
2-28
include a non-standard ceiling and visibility minimum. These are given to pilots so they can depart an
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Instrument Procedures Handbook (IPH)儀表程序手冊下(52)