(2)
27-61-00/201, Spoiler/Speedbrake Control System
(3)
31-41-00/201, Engine Indication and Crew Alerting System (EICAS)
(4)
32-09-02/201, Air/Ground Relays
(5)
33-16-00/501, Master Dim and Test
B. Access
(1) Location Zones
211/212 Control Cabin - Section 41
C. Prepare for the Test
S 215-002
(1)
Make sure no test equipment or covers are installed on the pitot probe, the total air temperature probe, or the angle of attack probe.
S 865-003
(2)
Supply electrical power (Ref 24-22-00/201).
S 715-004
(3)
Make sure the master dim and test system operates for the TAT annunciator (Ref 33-16-00/501).
S 715-005
(4)
Make sure the Engine Indication and Crew Alerting System (EICAS) operates (Ref 31-41-00/201).
S 215-006
(5)
Make sure the TAT light on the M10394 auxiliary annunciator panel (P5 panel) is on.
S 865-007
(6)
Put the computer select switch on the EICAS control panel (panel P9) in the AUTO position.
S 215-008
(7)
Make sure the EICAS message, PROBE HEAT, shows on the top EICAS display (panel P2).
D. Do a Test of the Total Air Temperature Probe Heat System
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
30-33-00
ALL ú ú 01 Page 501 ú Jun 20/92
A
757
MAINTENANCE MANUAL
S 865-009
WARNING:_______DO NOT TOUCH THE PROBE DURING THE TEST. THE PROBE BECOMES VERY HOT AND CAN BURN YOU.
CAUTION: DO NOT OPERATE THE PROBE HEATERS FOR MORE THAN 10 MINUTES.
_______ DAMAGE TO THE PROBE CAN OCCUR.
(1) Push and hold the WING ANTI-ICE WINDOW/PROBE HEAT test switch on the M10398 test panel (P61), in the WINDOW/PROBE HEAT position.
(a)
Make sure the TAT annunciator is off.
(b)
Make sure the EICAS messages, PROBE HEAT and TAT PROBE, do not show on the top EICAS display.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 防冰和排雨 CHAPTER 30 - ICE AND RAIN PROTECTION(104)
