曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

WA
Validity : S / N 1 - 9999 20-00-03Page 219
(BA) JUN 02
 
MAPAERO paint. Post-MOD. 151
1) Base
- White (TB 16-903).
2) Lateral strip
- Blue (SFACT) (TB 16-586).
3) Spinner, wing tips, fin tip - refer to Paragraph AUCUN LIEN
4) Wings and horizontal stabilizer leading edge
- Flat black (TB 16-947).
C. Aircraft paint references specific for "DOUANES"
1) Base
I - Ivory white (TB 16-520).
2) Upper lateral strip
I - Red (TB 16-521).
3) Lower lateral strip
I - Blue Toyota (TB 16-522).
4) Tricoloured decoration on vertical stabilizer.
D. Antistatic paint references for wing tips (specific for TB 20 SFACT aircraft)
1) Valid S / N 731 - 1212 - refer to Figures 202 and 204
- primer (TB 16-909) - thickness 30 to 50 R, drying at 20°C (68°F) = 24 h mini,
- STATIC F (TB 16-907) paint - thickness 30 to 40 drying at 20°C (68°F) = 48 h.
- installation of paint masking patches (2) - refer to Figure 204,
 - Madras red (TB 16-579) paint - thickness 20 to 40 R,
- installation of labels (1) - refer to 20-00-05.
I 2) Valid S / N 1213 - 9999 - refer to Figures 203 and 204
- primer (TB 16-909) - thickness 30 to 50 la, drying at 20°C (68°F) = 24 h mini,
- STATIC F (TB 16-907) paint - thickness 30 to 40 Ix, drying at 20°C (68°F) = 48 h,
- installation of paint masking patches (2) - refer to Figure 204,
- WHITE AUTOCRYL (TB 16-565) paint + hardener (TB 16-582) + thinner (TB 16-513) -thickness 50 to 60 t, 2 coats (interval of 5 mn between each coat), drying 30 mn at 60°C (86°F), 4 h at 20°C (68°F),
- AUTOCRYL REFLEX (TB 16-566) paint + hardener (TB 16-512) + thinner (TB 16-513), 1 coat + 3 crossed coats (interval of 15 mn between each coat), total thickness 100 1.c mini, drying 30 mn at 60°C (140°F), 4 h at 20°C (68°F),
- installation of labels (1) - refer to 20-00-05,
AAAA
Validity : S / N 1 - 9999 20-00 03Page 220
(BA) JUN 02
 
I S / N 1213 - 2149
- AUTOCLEAR (TB 16-581) varnish + hardener (TB 16-582) + thinner (TB 16-513) 
thickness 50 to 70 2 coats (interval of 5 mn between each coat), drying 15 mn at 140°F (60°C), 5 h at 68°F (20°C).
S / N 2150 - 9999
- AERODUR CLEARCOAT UVR (TB 16-518) + hardener (TB 16-519) + thinner (TB 16-524) -3 coats (1 coat, and after 10 minutes, 2 cross-lapped coats), drying 15 mn at 140°F (60°C), 5 h at 68°F (20°C).
 
14200003AAABVZ4001   14 mm
0.55 in
 Peinture anti-statique Appret
Anti-static paint Primer 

 
Antistatic paint reference for wing tips
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：TB20 MAINTENANCE MANUAL 20 STANDARD PRACTICES AIRFRAME TB20飛機維護手冊 20 標準施工機體(26)