曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

e) Apply primer (TB 16-568) (thickness 15 to 20 microns).
f) Dry primer, minimum :
18 hours : 20°C (68°F)
16 hours : 30°C (86°F)
2) Lacquering
a) Wipe.
b) Sand primer with abrasive cloth (TB 05-916B) if drying time is more than one week.
c) Apply a priming coat of polyurethane lacquer : series 58200 + hardener (TB 16-578) +
thinner (TB 16-576).
2 coats from 20 to 25 microns
20°C (68°F) 30°C (86°F)
Tack-free 1 hour 45 minutes
Can be handled 5 hours 3 hours
Can be masked 12 hours 10 hours
3) Decoration
a) After a minimum of 12 hours of drying at 20°C (68°F) or 10 hours at 30°C (86°F).
b) If the drying time is one week, sand the area to be painted with abrasive cloth (TB 05-916B).
c) Wipe.
d) Apply polyurethane lacquer in decor : series 58200 + hardener (TB 16-578) + thinner (TB 16-576). 2 coats from 20 to 25 microns
20°C (68°F) 30°C (86°F)
Tack-free 1 hour 45 minutes
Can be handled 5 hours 3 hours
B. Partial paint renewal
Temperature 20°C or 30°C (68°F or 86°F).
1) Priming coat operation
a) Sand the lacquer of the area to be repainted with abrasive cloth (TB 05-916B).
b) Wipe.
AAAA
Validity : S / N 1 - 9999 20 00-03Page 202
(BA) JUN 02
 
2) Lacquering a) Apply a priming coat of polyurethane lacquer : series 58200 + hardener (TB 16-578) +
thinner (TB 16-576).
2 coats from 20 to 25 microns
20°C (68°F) 30°C (86°F)
Tack-free 1 hour 45 minutes
Can be handled 5 hours 3 hours
Can be masked 12 hours 10 hours
3) Decoration
a) After a minimum of 12 hours of drying at 20°C (68°F) or 10 hours at 30°C (86°F).
b) If the drying time is one week, sand the area to be painted with abrasive cloth (TB 05-916B).
c) Wipe.
d) Apply polyurethane lacquer in decor : series 58200 + hardener (TB 16-578) + thinner (TB 16-576). 2 coats from 20 to 25 microns
20°C (68°F) 30°C (86°F)
Tack-free 1 hour 45 minutes
Can be handled 5 hours 3 hours
3. "POLYURETHANE SERIES 07396" PAINTS
NOTE : Correspondences between SOCATA references and paint codes - refer to 20-10-00. NOTE : After paint touch-ups or rectifications on control surfaces, check balancing.
S / N 794. 800 - 1599
A. Complete paint renewal
1) Preparation
OPERATIONS PRODUCTS SUPPLIERS REMARKS
DEGREASING THINNER (TB 16-575) VERILAC /
SANDING ABRASIVE CLOTH
(TB 05-9161) / DRY
BLOWING / / /
WASHING THINNER (TB 16-575) VERILAC /
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：TB20 MAINTENANCE MANUAL 20 STANDARD PRACTICES AIRFRAME TB20飛機維護手冊 20 標準施工機體(16)