曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

5) Using an oil can filled with oil (TB 03-900), lubricate the pulley hinge pin.
6) Remove excess oil with a clean lintfree cloth.
7) Using an oil can filled with oil (TB 03-900), lubricate :
- rudder pedal pin,
- brake master-cylinder control roller pin.
8) Remove excess oil with a clean lintfree cloth.
Post-MOD. 151
D. Lubrication of retractable footstep (Figure 213)
1) Remove and disassemble the retractable footstep - refer to 53-70-00.
2) Clean the parts using clean lintfree cloths and cleaning agent (TB 11-003).
3) Using a brush and grease (TB 04-004A), lubricate :
- pins,
- spacers,
- springs,
- cable end,
- cam.
4) Using an oil can filled with oil (TB 03-900), lubricate the control cable.
ADAA
Validity : S / N 1 - 9999 12 21-02Page 202
(EA) JUN 02
 
5) Remove excess grease and oil with clean lintfree cloths.
6) Assemble the footstep and install it on the support - refer to 53-70-00. S / N 1 - 9999
E. Lubrication of fuel unit controls (Figures 206 and 206A)
S / N 1 - 730
1) Using a brush and grease (TB 04-004A), lubricate fuel selector valve pin. S / N 731 - 9999
1) Using a brush and grease (TB 04-004A), lubricate fuel selector gimbal joint and fuel selector pin.
2) Using an oil can filled with oil (TB 03-900), lubricate fuel selector valve pin. S / N 1 - 9999
3) Remove excess oil and grease with a clean lintfree cloth.
F. Lubrication of engine controls (Figure 207)
1) Using an oil can filled with oil (TB 03-900), lubricate engine control cables.
2) Using a brush and grease (TB 04-004A), lubricate hinges.
3) Remove excess oil and grease with a clean lintfree cloth.
G. Lubrication of air conditioning controls (Figures 208 and 208A)
1) Using an oil can filled with oil (TB 03-900), lubricate air conditioning control cables.
2) Remove excess oil with a clean lintfree cloth.
H. Lubrication of front seat guide bars and rear bench latch (Figure 209) NOTE : Slightly lubricate in order not to stain the cockpit.
1) Using a brush and grease (TB 04-004A), lubricate the two front seat guide bars.
2) Using an oil can filled with oil (TB 03-900), lubricate the two rear bench latches.
3) Remove excess oil and grease with a clean lintfree cloth.
I. Lubrication of baggage compartment and access doors (Figures 210, 210A, 211 and 211A)
1) Using a brush and grease (TB 04-004A), lubricate closing system hinges.
2) Using a lubricant (TB 05-027D), lubricate (slightly in order not to stain the cockpit) : a) On access doors :
- lock hole,
- rod ends,
- hinges,
Post-MOD. 151
- hinge fittings,
S / N 1 - 9999
- hook pin.
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：TB20 MAINTENANCE MANUAL 12 SERVICING TB20飛機維護手冊 12 保養(yǎng)(60)