A - Propeller governor
B - Dual magneto
Area 100 lubrication - Governor control and dual magneto
Figure 202
ABAA
Validity : S / N 1 - 9999 12-21-01Page 204
(CA) JUN 02
Area 100 lubrication - Engine controls
Figure 203
Area 100 lubrication - Starter
Figure 204
AREA 200 LUBRICATION
MAINTENANCE PRACTICES
1. AREA 200 LUBRICATION
CAUTION : PRIOR TO ANY LUBRICATION IN THE CABIN, INSTALL COVERS ON SEATS AND PROTECT CARPET.
A. Tools and consumable materials
- Grease (TB 04-004A)
- Oil (TB 03-900)
- Clean lintfree cloths
- Brush
- Oil can
- Cleaning agent (TB 11-003)
- Petrolatum (TB 04-012)
Lubricant (TB 05-027D)
- Lubricant (TB 06-904)
B. Preparation
1) Remove inspection doors 211R, 211L, 235R, 235L, front cowling under hull 218F, rear cowling under hull 218A and baggage compartment bottom door 242 - refer to 06-30-00.
Post-MOD. 151
2) Remove retractable footstep fairings 2111L and 2111R.
S / N 1 - 9999
3) Remove tail cone 222 - refer to 53-20-04.
S / N 341 - 9999 and S / N 275 - 340 Pre-Kit OPT10 908700
4) Remove the elevator tab actuator cover.
S / N 1 - 9999
5) Remove FWD pedestal cover 252 and aft pedestal cover 253 - refer to 06-30-00.
6) Remove the front seats - refer to 25-11-00.
7) Remove the cabin upholstering.
8) Remove the tightness cloth.
C. Lubrication of flight controls (Figures 201, 202, 203, 204 and 205)
1) Using a brush soaked with cleaning agent (TB 11-003), clean :
- hinges,
- lever ends,
- rudder pedal and control wheel hinges and rods,
ADAA
Validity : S / N 1 - 9999 12-21 Page 201
02 (EA) JUN 02
- rudder tab rack,
- cables and pulley grooves,
- elevator tab actuator.
2) Remove excess cleaning agent with a clean lintfree cloth.
3) Using a brush and grease (TB 04-004A), lubricate :
- hinges,
- lever ends,
- control rod ends,
- rudder pedal hinges and rods,
- rudder tab rack,
- cables and pulley grooves,
- elevator tab actuator.
NOTE : Lubricate abundantly the cable winding area.
4) With a spray can of lubricant (TB 06-904) equipped with an extension tube to direct the injections, spray control wheels ball joints and pedestal hinge points.
NOTE : If elements to lubricate are removed, replace lubricant (TB 06-904) with grease (TB 04-004A).
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：TB20 MAINTENANCE MANUAL 12 SERVICING TB20飛機維護手冊 12 保養(59)
