3.
Provide power to the EGPWC and all required sensors and subsystems.

4.
Provide power to the Weather Radar system.

5.
Provide power to the display switching relays.

6.
Perform a Level 1 Self-Test per Section 3.3 to verify relay operation.

7 ADJUSTMENT/TEST
7.1 ADJUSTMENT
The EGPWS does not require any adjustments.

7.2 TEST
Line maintenance testing for the EGPWS consists of functional verification of the EGPWC and associated interfaces.  For EGPWC functional verification, see the Fault Isolation section.  Associated interfaces are verified through EGPWS ground tests as described in the following sections.
7.2.1 EGPWS GROUND TESTS
All EGPWS Ground Tests are developed by the installer to meet aircraft specific interfaces.  Examples of Ground Test are available from Honeywell.
Please forward your request to:
Honeywell
P.O. Box 97001 Attn: EGPWS Dept., Administrative Assistant, Certification Group M/S L2J 15001 N.E. 36th Street Redmond, WA USA 98052 Phone 1-800-813-2099 FAX: (425) 885-2994

8 INSPECTION/CHECK
8.1 GENERAL
The EGPWS does not require any specific periodic inspection or checks.  The system should be inspected for integrity and checked for wear/tear during the course of routine aircraft maintenance inspections.

9 CLEANING/PAINTING
9.1 GENERAL
The EGPWS does not contain any elements that required cleaning or painting on the aircraft.  Any cleaning or painting of the EGPWC should be performed by an authorized EGPWS repair facility.

10 REPAIRS
10.1 GENERAL
No on-aircraft repairs are identified for the EGPWS.  If a problem is found with a unit, remove and replace the unit per the removal and installation procedures and route the unit to an authorized repair facility for repair.

APPENDIX A: WINVIEWS
WinVIEWS (Windows Virtual Interface to the Enhanced Warning System) is a software tool developed by Honeywell to monitor or view values within the EGPWC, and perform certain test interface functions.
Overview: The WinVIEWS software provides a monitor function that does not alter the operation of the EGPWS. The monitoring of the values assists in the testing of the EGPWS by allowing the operator to quickly determine if the correct signal and scaling is being used by the EGPWS.  Additionally, WinViews provides a detailed status of the software configuration and input signals, which enables quick identification of system anomalies.  WinVIEWS is also utilized for programming the Configuration Module in MK VI and MK VIII applications.
To obtain a copy of the WinVIEWS software, contact: 
Honeywell or  Honeywell 
Aerospace Electronic Systems  Aerospace Electronic Systems 
P.O. Box 97001  P.O. Box 97001 
Redmond, WA  98073-9701 USA  Redmond, WA  98073-9701 USA 
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：增強型近地警告系統 Enhanced Ground Proximity Warning 航線維護手冊 Systems Line Maintenance Manual(48)