On the top of the engine fan case, the v-band anchor has a saddle fitting, anchor strap, and v-band hinges. The v-groove latch bands attach to the anchor strap at the v-band hinges.
EFFECTIVITY BEJ ALL
The latch bands come together at the bottom of the T/R. The right latch band has a latch band T-bolt receiver and the left latch band has the V-band latch assembly. The latch bands are attached to the thrust reverser with retainers.
The v-band latch has an adjustable hook to adjust the amount of force to close the latch. The v-band latch handle unfolds to open the latch or close and lock the latch. The handle folds to stow the latch handle.
Functional Description
The hook on the v-band latch engages the latch band T-bolt retainer. The latch handle draws the hook back and puts the tension on the latch bands which clamps the thrust reverser halves together on the engine fan case. The force on the latch handle to close the latch is approximately 55 pounds (245 newtons).
Training Information Point
WARNING: MAKE SURE THAT YOU ARE FORWARD OF THE V-BAND LATCH WHEN YOU OPERATE THE LATCH HANDLE. INJURIES TO PERSONNEL CAN OCCUR IF THE LATCH OPENS SUDDENLY AND THE LATCH HANDLE HITS YOU.
You must always be forward of the V-band latch when you operate the latch handle because this will put you out of the path of the handle.
78-31-00

Page 21 D633W101-BEJ Jan 05/2004

THRUST REVERSER SYSTEM -V-GROOVE LATCH BANDS, V-BAND ANCHOR, V-BAND LATCH

WARNING: MAKE SURE THE V-BAND LATCH IS FULLY ENGAGED BEFORE YOU RELEASE THE LATCH HANDLE. INJURIES TO PERSONNEL CAN OCCUR IF THE LATCH OPENS SUDDENLY AND THE LATCH HANDLE HITS YOU.
Do not push the latch handle to close the V-band latch. Always pull on the latch handle when you close the V-band latch because this will put you out of the path of the handle.
Chapter 78 tells you how to operate the V-band latch.

WARNING: DO THE DEACTIVATION PROCEDURE TO PREVENT THE OPERATION OF THE THRUST REVERSER. THE ACCIDENTAL OPERATION OF THE THRUST REVERSER CAN CAUSE INJURIES TO PERSONNEL AND DAMAGE TO EQUIPMENT
EFFECTIVITY BEJ ALL  78-31-00 
Page 22 
D633W101-BEJ  Jan 05/2004 

THRUST REVERSER SYSTEM -V-GROOVE LATCH BANDS / V-BAND ANCHOR

EFFECTIVITY BEJ ALL  78-31-00 
Page 23 
D633W101-BEJ  May 05/2003 

THRUST REVERSER SYSTEM -T/R SLEEVE

Purpose

The thrust reverser (T/R) sleeve makes two different routings for the fan exhaust:
*
Forward thrust

*
Reverse thrust.

Location
The thrust reverser (T/R) sleeve is aft of the fan cowl panels.
Physical Description

The thrust reverser (T/R) sleeve is a composite assembly with an outer sleeve and an inner sleeve. The outer sleeve makes the exterior contour of the thrust reverser. The inner sleeve makes the outer wall of the fan duct. Also, the inner sleeve holds the thrust reverser blocker doors and acoustic panels and skins. The inner and outer sleeves are fastened together at the aft end.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：777 AMM 飛機維護手冊 發動機排氣 Engine Exhaust PW 777 AIRCRAFT MAINTENANCE MANUAL(17)