ENG
31-62-00-712 Rev 1 12/25/2002
CDS - OPERATION - SWITCHING - ENGINE SWITCH
31-62-00
- 519 -
ALTEON PROPRIETARY - Copyright (c) - See title page for details
CDS -- OPERATION - DISPLAY SOURCE SELECTOR Display Source Selector
The display source selector lets you select the DEU that controls the displays. For maintenance, use the switch to quickly find if there is a DEU failure or partial failure. The flight crew can use the switch if the data that shows is in error or to find if there is a data error.
When the selector is in the AUTO position, DEU 1 controls the captain and upper center display units and DEU 2 controls the first officer and the lower center display units, if there are no failures.
If any of the graphics generators (GG) circuit card assemblies (CCA) fails in either DEU, the DEUs automatically change the GG CCA that controls the display units.
When the selector is in the ALL ON ONE position, DEU 1 controls all six display units. When the selector is in the ALL ON 2, DEU 2 controls all six display units.
737-600/700/800/900 TRAINING MANUAL
31-62-00
737-600/700/800/900 TRAINING MANUAL
31-62-00-710 Rev 1 07/01/1998
COAX OUTPUT 1 = GG A
COAX OUTPUT 2 = GG B
SELECTOR POSITION DU LOB LIB UPPER C LOWER C RIB ROB
FAILURES DEU 1 DEU 1 DEU 1 DEU 2 DEU 2 DEU 2
NONE GG A GG A GG B GG A GG B GG B
DEU 1 DEU 1 DEU 1 DEU 2 DEU 2 DEU 2 DEU 2
GG A GG B GG B GG A GG A GG B GG B
DEU 1 DEU 1 DEU 1 DEU 2 DEU 2 DEU 2 DEU 2
GG B GG A GG A GG A GG A GG B GG B
DEU 2 DEU 1 DEU 1 DEU 1 DEU 1 DEU 2 DEU 2
GG A GG A GG A GG B GG B GG B GG B
DEU 2 DEU 1 DEU 1 DEU 1 DEU 1 DEU 2 DEU 2
AUTO GG B GG A GG A GG B GG B GG A GG A
DEU 1 DEU 2 DEU 2 DEU 2 DEU 2 DEU 2 DEU 2
GG A & B GG A GG A GG A GG B GG B GG B
DEU 2 DEU 1 DEU 1 DEU 1 DEU 1 DEU 1 DEU 1
GG A & B GG A GG A GG A GG B GG B GG B
DEU 1 GG A DEU 1 DEU 1 DEU 1 DEU 2 DEU 2 DEU 2
DEU 2 GG A GG B GG B GG B GG B GG B GG B
DEU 1 GG A DEU 1 DEU 1 DEU 1 DEU 2 DEU 2 DEU 2
DEU 2 GG B GG B GG B GG B GG A GG A GG A
DEU 1 GG B DEU 1 DEU 1 DEU 1 DEU 2 DEU 2 DEU 2
DEU 2 GG A GG A GG A GG A GG B GG B GG B
DEU 1 GG B DEU 1 DEU 1 DEU 1 DEU 2 DEU 2 DEU 2
DEU 2 GG B GG A GG A GG A GG A GG A GG A
ALL ON 1 DEU 1 GG A DEU 1 GG A DEU 1 GG A DEU 1 GG B DEU 1 GG B DEU 1 GG B
ALL ON 2 DEU 2 GG A DEU 2 GG A DEU 2 GG A DEU 2 GG B DEU 2 GG B DEU 2 GG B
- 521 -
CDS - OPERATION - DISPLAY SOURCE SELECTOR
31-62-00
737-600/700/800/900 TRAINING MANUAL CDS -- OPERATION - CONTROL PANEL SELECT SWITCH Control Panel Select Switch
The control panel select switch lets you select which EFIS control panel controls the PFD and ND displays. The control panel select switch is a three position toggle switch.
When the switch is in the NORMAL position, the captain EFIS control panel controls the captain PFD and ND displays and the first officer EFIS control panel controls the first officer PFD and ND displays.
When the switch is in the BOTH ON 1 position, the captain EFIS control panel controls the captain and the first officer PFD and ND displays.
When the switch is in the BOTH ON 2 position, the first officer EFIS control panel controls the captain and the first officer PFD and ND displays.
31-62-00
31-62-00-711 Rev 1 03/30/1998
737-600/700/800/900 TRAINING MANUAL
CONTROL PANEL
SELECT SWITCH
SWITCH POSITION DISPLAYS CAPTAIN DISPLAYS F/O DISPLAYS
NORMAL CAPT EFIS CP F/O EFIS CP
BOTH ON 1 CAPT EFIS CP CAPT EFIS CP
BOTH ON 2 F/O EFIS CP F/O EFIS CP
CDS - OPERATION - CONTROL PANEL SELECT SWITCH 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：737-600/700/800/900培訓手冊 TRAINING MANUAL 2(53)
