C. Procedure
S 422-103-N00
CAUTION: BE CAREFUL DURING THE INSTALLATION AND WHEN YOU HOLD THE STAB
_______
TRIM INDICATORS. DAMAGE TO THE FINISH CAN OCCUR.
(1) Install the STAB TRIM indicators.
(a)
Put the STAB TRIM indicators on the side panel bracket assemblies.
(b)
Install the four screws in each STAB TRIM indicator.
(c)
Tighten the screws.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
76-11-03
ALL ú ú N02 Page 257 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
S 432-104-N00
(2) Attach the wire to the control stand with the cable clamps.
TASK 76-11-03-402-105-N00
36. Install the Flap Lever Cover (Fig. 211)
____________________________
A. References
(1)
IPC 76-11-03
B.
Access
(1)
Location Zone
221 Control Cabin, LH
222 Control Cabin, RH
C.
Procedure
S 422-106-N00
(1) Install the flap lever cover.
(a)
Connect the inline electrical connector.
(b)
Put the flap lever cover on the control stand.
(c)
Install the four screws in the flap lever cover.
(d)
Tighten the four screws.
S 432-107-N00
(2) Install the flap lever lightplate.
(a)
Put the flap lever lightplate on the flap lever cover.
(b)
Connect the electrical connector for the flap lever lightplate.
(c)
Install the two screws in the flap lever lightplate.
(d)
Tighten the two screws.
TASK 76-11-03-402-108-N00
37. Install the Speed Brake Lever Cover (Fig. 210)
___________________________________
A. References
(1)
IPC 76-11-03
B.
Access
(1)
Location Zone
221 Control Cabin, LH
222 Control Cabin, RH
C.
Procedure
S 422-109-N00
(1) Install the cover for the speed brake lever.
(a)
Connect the inline electrical connector.
(b)
Put the cover on the control stand.
(c)
Install the five screws in the cover.
(d)
Tighten the five screws.
S 432-110-N00
(2) Install the speed brake lightplate.
(a) Put the speed brake lightplate on the cover.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
76-11-03
ALL ú ú N02 Page 258 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
(b)
Connect the electrical connector for the speed brake lightplate.
(c)
Install the three screws in the speed brake lightplate.
(d)
Tighten the three screws.
TASK 76-11-03-402-111-N00
38. Install the Control Stand Side Panels (Fig. 204)
_____________________________________
A. References
(1) IPC 76-11-03
B. Access
(1) Location Zone
221 Control Cabin, LH
222 Control Cabin, RH
C. Procedure
S 422-112-N00
(1) Install the right and left side panels.
(a)
Put the side panels on the control stand.
(b)
Engage the 13 quick-release fasteners to hold each side panel to the control stand.
TASK 76-11-03-862-113-N00
39. Energize the Thrust Lever Position Resolvers (Fig. 201)
____________________________________________
A. Access
(1) Location Zone
221 Control Cabin, LH
222 Control Cabin, RH
B. Procedure
S 862-114-N00
(1) Close these circuit breakers and remove the DO-NOT-CLOSE tags:
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 發動機控制 ENGINE CONTROLS(43)
