28-22-07
 ALL  ú ú 01B Page 441 ú Oct 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
G83220
A

747-400
MAINTENANCE MANUAL

BLEED VALVE SHUTOFF VALVE

CONNECTOR (ATTACH TO THE AIR PRESSURE SOURCE) TEE
HOSE
MAIN FUEL SUPPLY LINE (REF) PRESSURE GAGE

PRESSURE RELIEF VALVE (50 PSI MAXIMUM)
CONNECTOR (ATTACH TO THE MAIN FUEL SUPPLY LINE)

REGULATOR WHICH CAN DECREASE AIR PRESSURE TO 40 PSIG.
Pressure Check Equipment - Coupling Maintenance Figure 406
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-22-07
 ALL  ú
 ú  01B  Page 442
 ú  Oct 10/97 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
G83221
A
747-400
MAINTENANCE MANUAL

 E. Access
 (1)  
Location Zones
 452 Nacelle Strut 1 - Torque Box
 521 Nacelle Strut 1 - Leading Edge to Front Spar
 462 Nacelle Strut 2 - Torque Box
 521 Nacelle Strut 2 - Leading Edge to Front Spar
 472 Nacelle Strut 3 - Torque Box
 621 Nacelle Strut 3 - Leading Edge to Front Spar
 482 Nacelle Strut 4 - Torque Box
 621 Nacelle Strut 4 - Leading Edge to Front Spar

 (2)  
Access Panels
 415 Thrust Reverser Half - Engine 1
 416 Thrust Reverser Half - Engine 1
 521FT Wing Leading Edge Cover - Nacelle Strut 1
 425 Thrust Reverser Half - Engine 2
 426 Thrust Reverser Half - Engine 2
 521CT Wing Leading Edge Cover - Nacelle Strut 2
 435 Thrust Reverser Half - Engine 3
 436 Thrust Reverser Half - Engine 3
 611CT Wing Leading Edge Cover - Nacelle Strut 3
 445 Thrust Reverser Half - Engine 4
 446 Thrust Reverser Half - Engine 4
 621FT Wing Leading Edge Cover - Nacelle Strut 4

 F.
Prepare for Removal

 S 864-065
 (1)  Supply the necessary electrical power (AMM 24-22-00/201).
 S 864-066
 WARNING: MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF THE LE AND TE
_______ FLAPS AND FLAP DRIVE MECHANISMS BEFORE YOU MOVE THE FLAP CONTROL LEVER. WITH HYDRAULIC POWER REMOVED, THE FLAPS WILL MOVE AUTOMATICALLY BY ELECTRICAL POWER WHEN YOU MOVE THE FLAP CONTROL LEVER. THIS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
 WARNING: YOU MUST CAREFULLY DO THE STEPS IN THE TASK BELOW TO INSTALL
_______ THE LE FLAP SAFETY LOCKS. THE LE FLAPS CAN MOVE QUICKLY IF YOU DO NOT INSTALL THE SAFETY LOCKS CORRECTLY. THIS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
 (2)  Do this task: Leading Edge Flap Extention and Safety Lock
 Installation (AMM 27-81-00/201).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-22-07
 ALL  ú ú 01B Page 443 ú Oct 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 S 864-067
 (3)  Make sure all of the FUEL CONTROL switches, found on the engine start module, are in the CUTOFF position. (a) Attach a DO-NOT-OPERATE tag to the FUEL CONTROL switches.
 S 864-068
 (4)  Push the STAT button on the EICAS display select panel. (a) Make sure the status page appears on the auxiliary EICAS. (b) Make sure these EICAS messages do not show:___ 1) FUEL SPAR VLV (1, 2, 3, or 4) 2) FUEL CUTOFF ENG (1, 2, 3, or 4).
 S 864-069

 WARNING: MAKE SURE YOU OPEN THE APPLICABLE CIRCUIT BREAKERS FOR THE
_______ ENGINE IGNITION BEFORE YOU OPEN THE ENGINE CIRCUIT BREAKER FOR THE FUEL CONTROL VALVE. THE IGNITER PLUGS CAN START THE IGNITION AUTOMATICALLY IF YOU DO NOT OPEN THE CIRCUIT BREAKERS. IF THE COMBUSTION CHAMBER HAS FUEL IN IT, AN INTERNAL ENGINE FIRE OR A TAILPIPE FIRE CAN OCCUR. THE FIRE CAN CAUSE INJURY TO PERSONS AND DAMAGE TO THE ENGINE.
 (5)  
FOR THE APPLICABLE ENGINE; Open these circuit breakers and attach DO-NOT-CLOSE tags:

 (a)  
On the main power distribution panel, P6: 1) 6F01 IGN 1 ENG 1 2) 6G19 STBY IGN ENG 1 3) 6K19 IGN 2 ENG 1 4) 6F02 IGN 1 ENG 2 5) 6G20 STBY IGN ENG 2 6) 6K20 IGN 2 ENG 2 7) 6F03 IGN 1 ENG 3 8) 6G21 STBY IGN ENG 3 9) 6K21 IGN 2 ENG 3 10) 6F04 IGN 1 ENG 4 11) 6G22 STBY IGN ENG 4 12) 6K22 IGN 2 ENG 4
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 燃油 FUEL 3(19)