曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

747-400 MAINTENANCE MANUAL
 E. Procedure
 S 164-010
 (1)  Rub the sealing surface clean on the spar and on the pump receiver.
 S 434-011
 (2)  Install a new packing (6), lightly lubricated with petrolatum, in the groove on the receiver (1).
 S 424-012
 (3)  Hold the receiver (1) in its position against the spar in the tank.
 S 434-013
 (4)  From out of the tank, put the spacer (9) on the spar and install the socket-head bolts (7) and the washers (8).
 S 434-024
 (5)  Install lockwire on the bolts.
 S 434-014
 (6)  Install a new packing (5), lightly lubricated with petrolatum, into the discharge tube coupling (4).
 S 434-015
 (7)  Connect the discharge tube coupling (4) to the receiver (1).
 S 434-025
 (8)  Tighten the coupling with your hand until you can not see the threads.
 S 434-029
 (9)  Install lockwire between the discharge tube coupling (4) and the receiver (1).
 S 434-016
 (10) Install a new packing (3), lightly lubricated with petrolatum, into the inlet tube coupling (2).
 S 434-017
 (11) Connect the inlet tube coupling (2) to the receiver (1).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-25-09
 ALL  ú ú 01 Page 404 ú Oct 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 434-026
 (12)
 Tighten the coupling with your hand until you can not see the threads.

 S 434-027

 (13)
 Install lockwire between the inlet tube coupling (2) and the receiver (1).

 S 864-018

 (14)
 Go out of the No. 2 main tank (AMM 28-11-00/201).

 S 414-028

 (15)
 Install the access door, 544AB.

 S 434-019

 (16)
 Install the APU fuel boost pump (AMM 28-25-01/401).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-25-09
 ALL  ú ú 01 Page 405 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 APU FUEL SHUTOFF VALVE BODY - REMOVAL/INSTALLATION
__________________________________________________
 1.  General_______
 A. This procedure has two tasks:
 (1)  
A task to remove the APU fuel shutoff valve body.

 (2)  
A task to install the APU fuel shutoff valve body.

 B.
Two persons are necessary for these tasks:

 (1)  
One person out of the fuel tank to remove or install the valve body mounting hardware.

 (2)  
One person in the fuel tank to hold the valve body and connect or disconnect the fuel tubing.

 TASK 28-25-10-004-001
 2.  APU Fuel Shutoff Valve Body Removal (Fig. 401)___________________________________
 A. References
 (1)  
AMM 28-11-00/201, Fuel Tanks

 (2)  
AMM 28-25-02/401, APU Fuel Shutoff Valve Actuator

 (3)  
AMM 28-26-00/201, Defueling

 (4)  
AIPC 28-25-01 Fig. 2

 (5)  
AIPC 28-25-04 Fig. 1

 B.
Access

 (1)  
Location Zone 544 Inbd Main Tank (Part), Mid Spar to Rear Spar, Left

 C.
Procedure

 S 034-002
 (1)
Remove the APU fuel shutoff valve actuator (AMM 28-25-02/401).

 S 654-003

 (2)  
Defuel the No. 2 main tank (AMM 28-26-00/201).

 S 864-004
 WARNING: YOU MUST OBSERVE ALL OF THE FUEL TANK PURGING AND ENTRY
_______ PRECAUTIONS. IF YOU FAIL TO OBSERVE ALL THE FUEL TANK PURGING AND ENTRY PRECAUTIONS, YOU MAY INJURE YOURSELF OR DAMAGE THE AIRPLANE.
 (3)  
Purge and go into the No. 2 main tank through the access door 544AB (AMM 28-11-00/201).

 S 034-005

 (4)  
Disconnect the coupling nut on the outlet tube (4) from the coupling (8).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 燃油 FUEL 3(106)