NOTE: This fuel capacity is equal to the quantity of fuel that
____ will be moved from the No. 2 or No. 3 reserve tanks.
 (b) Put the RESERVE 2&3 XFER switch to the OPEN position.
 NOTE: The RESERVE 2&3 XFER switch is on the maintenance
____
 overhead panel P461.

 (c)  Monitor the reserve tank fuel quantities on the fuel synoptic.
 NOTE: The reserve transfer arrows will show on the fuel
____
 synoptic.

 (d)  If you are scheduled to move all of the fuel from the reserve tanks, continue until the reserve tank fuel quantities on the fuel synoptic are zero.
 NOTE: The flow bars in the reserve tank transfer arrows will
____ not show when the reserve tank fuel quantity decreases to less than 100 pounds (45 kilograms).
 S 652-408
 (2)  
Stop the fuel transfer operation:

 (a)
Put the RESERVE 2&3 XFER switch to the CLOSE position.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-26-00
 ALL  ú ú 10 Page 222 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 682-412
 (3)  
Do these steps to continue with the fuel transfer operation:

 (a)  
Continue to transfer fuel from the other tanks (if necessary)

 (b)  
Do this procedure: Drain the Remaining Fuel (if necessary)

 (c)  
Do this procedure: Put the Airplane Back to the Usual Condition.

 I.
Drain the Remaining Fuel

 S 862-398
 (1)  
Electrically ground the container and other applicable equipment to the airplane structure (AMM 20-41-01/201).

 (a)  
Do not connect the container and the other equipment to the airplane structure in the area immediately adjacent to the sump drain valve.

 S 682-399
 (2)  Drain the remaining fuel from the main, reserve, and center wing tanks.
 NOTE: The best airplane attitude to drain the fuel tank sumps
____
 is 1/2° nose-down pitch and 0° roll.

 The approximate quantity of remaining fuel in each sump is: 5 gallons in each reserve tank, 35 gallons in each outboard main, 25 gallons in each inboard main, and 125 gallons in the center wing tank.
 (a)  
Put the hose for the drain tool assembly in the container.

 (b)  
Put the drain tool into the sump drain fitting.

 (c)  
When the fuel flow stops, remove the drain tool assembly.

 J.
Put the Airplane Back to the Usual Condition

 S 652-360
 (1)
At the left and right pressure refuel station, do these steps:

 (a)  
Make sure these valve switches are in the CLOSED position: 1) Refuel valves for all tanks 2) Manual shutoff valves 3) Manual defueling valves.

 a) Lockwire the manual defueling valve handles.

 (b)  
Close the access panels, 521BB and 621BB, for the pressure refuel station.

 (c)  
Close the access panel, 521CB, for the refuel control panel.

 S 652-361
 (2)  
If you transferred fuel from the main tanks or center wing tank, do these steps:

 (a)  
AIRPLANES WITH A HYDROMECHANICAL SCAVENGE SYSTEM; Install the fuel strainers (AMM 28-15-00/201).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-26-00
 ALL  ú ú 10 Page 223 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 (b)  Close these valves with the manual override lever (AMM 28-31-04/401): 1) Jettison transfer valve for the No. 2 main tank 2) Jettison transfer valve for the No. 3 main tank 3) Left and right jettison transfer valves for the center wing
 tank.
 S 862-396
 (3)  
Remove DO-NOT-CLOSE tags and close these circuit breakers:

 (a)  
P6 Main Power Distribution Panel
 1) 6E17 CTR R & MAIN 2 JTSN VLV
 2) 6F17 CTR L & MAIN 3 JTSN VLV
 3) 6C18 JTSN NOZZLE VLV CONT R
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 燃油 FUEL 3(121)