EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-13-01
 ALL  ú ú 06 Page 406 ú Oct 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

NOTE: VENT DRAIN VALVE INSTALLATION.

Fuel Vent Drain Valve Installation
Figure 401 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-13-01
 ALL  ú ú 05 Page 407 ú Jun 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
G54655
A
747-400
MAINTENANCE MANUAL

 (2)  
Access Panel
 131AZ Spanwise Beam Access Door
 131BZ Spanwise Beam Access Door
 131CZ Spanwise Beam Access Door
 132AZ Spanwise Beam Access Door
 132BZ Spanwise Beam Access Door
 552AB Fuel Tank Access Door
 552FB Fuel Tank Access Door
 555AB Surge Tank Access Door
 555BB Surge Tank Access Door
 652AB Fuel Tank Access Door
 652FB Fuel Tank Access Door
 655AB Surge Tank Access Door
 655BB Surge Tank Access Door

 C.
Install the Fuel Vent Drain Valves in the Fuel Tanks

 S 434-010
 (1)  
Install the gasket on the valve mounting flange.

 S 424-011

 (2)  
Put the valve and the gasket into the position on the vent tube or the stringer mounting flange.

 S 434-012

 (3)  
Install the bolts and the washers (2 places) that attach the valve to the mounting flange.

 S 414-013

 (4)  
Install the spanwise beam access doors, if you removed it
 (AMM 28-11-09/401).

 S 864-014

 (5)  
Get out of the fuel tank and close the fuel tank (AMM 28-11-00/201).

 D.
Install the Fuel Vent Drain Valves in the Surge Tanks

 (1)  
Go into the surge tank (AMM 28-11-00/201).

 S 014-026
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-13-01
 ALL  ú ú 05 Page 408 ú Jun 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 747-400 MAINTENANCE MANUAL
 (2)  S 434-029Do these steps to install the fuel vent drain valve: (a) Install the gasket on the valve mounting flange. (b) Put the valve and the gasket into the position on the vent tube. (c) Install the bolts and the washers (2 places) that attach the valve to the mounting flange.
 (3)  S 864-022Get out of the fuel tank and close the fuel tank (AMM 28-11-00/201).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-13-01
 ALL  ú ú 07 Page 409 ú Jun 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 FUEL VENT FLOAT VALVE - REMOVAL/INSTALLATION
____________________________________________
 1.  General_______
 A.  This procedure contains instructions to remove and install the fuel vent float valve as one unit or to remove and install the poppet and float assembly. The fuel vent float valves are referred to as the float valves in this procedure.
 B.  Usually it is necessary to replace only the poppet and float assembly on the float valve.
 C.  The float valves are found in each fuel tank, attached to the vent tubes in the wing tanks.
 D.  Access to the float valves is through the fuel tank access doors installed in the lower skin of the wing and the front spar of the center wing tank.
 TASK 28-13-02-004-001
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 燃油 FUEL 1(138)