38-32-42
 ALL  ú ú 02 Page 404 ú Nov 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 424-021
 (12) In the non-modular lavatories D or E; install the air seal on the fire shroud.
 NOTE: Bond the air seal to the ground flush line and the fire
____
 shroud. Use the method in SOPM 20-50-12.

 S 864-028
 (13)
 Flush the toilet tank with water (AMM 12-17-00/301).

 S 794-029

 (14)
 Make sure there are no leaks from the connections for the toilet flush line.

 S 414-030

 (15)
 Install the toilet tank shroud.

 S 414-032

 (16)
 If it is necessary to remove the auxiliary waste tank during removal, install the auxiliary waste tank (AMM 38-32-51/401).

 S 414-031

 (17)
 Install the panels that were removed to get access to the ground flush hose.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 38-32-42
 ALL  ú ú 02 Page 405 ú Nov 15/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 TOILET WASTE TANK - REMOVAL/INSTALLATION
________________________________________
 1.  General_______
 A.  This procedure has five tasks. The first task removes the lavatory waste tank. The second task removes the auxiliary waste tank. The third task installs the lavatory waste tank. The fourth task installs the auxiliary waste tank. The fifth task does a check for leakage after you install a waste tank.
 B.  Do the test for leakage after you install an auxiliary waste tank or a waste tank that connects to it.
 TASK 38-32-51-004-072
 2.  Lavatory Waste Tank Removal (Fig. 401)___________________________
 A.  Consumable Materials
 (1)  
D00378 Grease - MIL-G-81322 (AMM 20-30-21/201)

 (2)  
A00247 Sealant - Faying Surface and Fillet, BMS 5-95, Class B (AMM 20-30-11/201)

 B.  References
 (1)  
AMM 12-17-00/301, Toilet Servicing

 (2)  
AMM 25-41-11/401, Lavatory Sink Cabinet

 C.  Access
 (1)  Location Zones
 103 Forward Lavatory
 113 Left Aft Lavatory
 114 Right Aft Lavatory
 118 Lavatory

 D.  Prepare to Remove the Lavatory Waste Tank
_________________________________________
 S 684-001
 (1)  
Drain and flush the waste tank from the external service panel (AMM 12-17-00/301).

 S 864-002

 (2)  
Open the applicable lavatory flush motor circuit breaker on the P18 panel and attach a DO-NOT-CLOSE tag.

 S 014-005

 (3)  
ALL EXCEPT AIRPLANES WITH MODULAR LAVATORIES;
 Do the steps that follow:

 (a)  
In the forward lavatory, remove the fasteners and the access panel from the toilet back shroud.

 (b)  
In the aft lavatory, do these steps: 1) Disengage the toilet back shroud from the spring clip.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 38-32-51
 ALL  ú ú 02 Page 401 ú Jul 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 2) Remove the shroud sufficiently to get access to the electrical connectors. 3) Remove the fasteners from the toilet tank shroud.
 (c)  In the lavatories just forward of the aft entry doors, do these steps: 1) Remove the fasteners and the toilet tank shroud. 2) Remove the fasteners and the toilet back shroud.
 S 014-008
 (4)  AIRPLANES WITH RUMBOLD OR YRC MODULAR LAVATORIES; Do the steps that follow:
 (a)  
Remove the two fasteners that hold the flush handle and the face plate to the shroud.

 (b)  
To remove the collar, turn the collar and disengage the hooks.

 (c)  
Pull the left collar away and in to disengage the boss from the keyhole slot.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 WATER AND WASTE(82)