EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 35-22-31
 ALL  ú ú 01 Page 602 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 (3)  S 216-010Visually examine the oxygen mask hoses and oxygen mask bags for the presence of liquid contaminants on the inside and outside surfaces.
 NOTE:____ A liquid substance on the inside and outside surfaces may indicate the diffusion of phthalate plasticizer, a substance used to make the material flexible over the normal operating temperature range. The plasticizer can diffuse out of the material due to aging, thermal effects, and humidity.
 (a)  If there are liquid contaminants found, replace the oxygen mask assembly (AMM 35-22-31/401).
 (4)  S 216-011Carefully examine the hose on the passenger oxygen mask. (a) Make sure it is soft and flexible. (b) Examine the color on the hose.
 NOTE:____ A change in the color of the hose occurs with time. This is not a satisfactory cause to replace the hose.
 (5)  S 906-012Replace the hose if it is not in satisfactory condition (AMM 35-22-31/401).
 (6)  S 226-013Pull on each hose at a point near the bayonet fitting with a force of 18 pounds. (a) If the hose comes off when you pull on it, replace the mask (AMM 35-22-31/401).
 (7)  S 866-014Put the masks back in the oxygen box (AMM 35-22-31/401).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 35-22-31
 ALL  ú ú 01 Page 603 ú Mar 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 OXYGEN MASKS - CLEANING/PAINTING
________________________________
 1.  General________
 A. This procedure contains one task:
 (1)  Oxygen Mask Cleaning
 TASK 35-22-31-107-001
 2.  Oxygen Mask Cleaning____________________
 A. General
 (1)  You must clean and use disinfectant on the respiratory equipment after each use. The oxygen mask facepieces are made of material that can be cleaned and disinfected with one operation. You will mix a solution that can clean and disinfect in one operation.
 B. Consumable Materials
 (1)  
The detergent disinfectant product that is commercially available (use one of these):

 (a)  
G02198 Airwick Antimicrobial Topical Gel

 (b)  
G02197 West Wescodyne

 (c)  
G02199 Lysol Brand Disinfectant (EPA Registration Number 675-19)

 (d)  
B00130 Isopropyl alcohol

 (2)  
G00034 Absorbent cheesecloth

 (3)  
G00116 Sponge applicator (optional)

 C. Access
 (1)  Location Zone
 100 Upper Half of the Fuselage

 D. Clean the Oxygen Mask Facepiece
 S 867-002
 (1)  
Mix a solution of the detergent disinfectant product with warm water. (Use the dilution instructions found on the product label.)

 S 117-003

 (2)  
Apply the solution to the facepiece with the absorbent cheesecloth or the sponge applicator.

 (3)  
Flush the facepiece with clear, warm water.

 (4)  
Let the facepiece dry with air, or dry the facepiece with a cloth.

 (5)  
Assemble and install the facepiece.

 S 117-004
 S 117-005
 S 427-006
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 35-22-31
 ALL  ú ú 01 Page 701 ú Mar 15/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 ALTITUDE PRESSURE SWITCH - REMOVAL/INSTALLATION
_______________________________________________
 1. General
________
 A. This procedure has these tasks:
 (1)  
Altitude Pressure Switch Removal
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 氧氣 OXYGEN(61)