(a)
ILS transfer relay No. 1 (R315)
(b)
ILS transfer relay No. 2 (R316).
(2)
Two VHF NAV transfer relays:
(a)
VHF NAV transfer relay No. 1 (R44)
(b)
VHF NAV transfer relay No. 2 (R45).
TASK 34-31-72-004-144
2. Antenna Transfer Relay Removal______________________________
A. General
(1) The antenna transfer relays are installed on shelf 4 of the electronics equipment rack (E3).
B. References
(1) 34-31-91/401, RF Attenuator
C. Access
(1)
Location Zone
205 Electronics Compartment
(2)
Access Panel
1201L Electronic Equipment Access Door
D. Procedure
S 864-136
(1) For the ILS transfer relay No. 1: Open this circuit breaker and attach a DO-NOT-CLOSE tag:
(a) P18 Load Control Center - Left
1) VHF NAV-1 VOR/ILS
S 864-137
(2) For the ILS transfer relay No. 2: Open this circuit breaker and attach a DO-NOT-CLOSE tag:
(a) P6 Load Control Center - Right
1) VHF NAV-2 VOR/ILS
S 024-068
(3) Remove the antenna transfer relay:
(a) If the RF attenuator is installed, do these steps: 1) Disconnect the coaxial cable from the RF attenuator.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH EFIS ú
34-31-72
ú ú 01 Page 401 ú Nov 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
2) Remove the RF attenuator from the relay (Ref 34-31-91/401).
(b)
Disconnect the coaxial cables and electrical cables from the relay.
(c)
Remove the screws that attach the relay to the shelf.
(d)
Remove the antenna transfer relay from the shelf.
TASK 34-31-72-404-145
3. Antenna Transfer Relay Installation
___________________________________
A. General
(1) The antenna transfer relays are installed on shelf 4 of the electronics equipment rack (E3).
B. References
(1)
24-22-00/201, Manual Control
(2)
34-31-02/501, VOR/ILS Navigation System
(3)
34-31-91/401, RF Attenuator
C. Access
(1)
Location Zone
205 Electronic Compartment
(2)
Access Panel
1201L Electronic Equipment Access Door
D. Procedure
S 864-142
(1) For the ILS transfer relay No. 1: Open this circuit breaker and attach a DO-NOT-CLOSE tag:
(a) P18 Load Control Center - Left
1) VHF NAV-1 VOR/ILS
S 864-143
(2) For the ILS transfer relay No. 2: Open this circuit breaker and attach a DO-NOT-CLOSE tag:
(a) P6 Load Control Center - Right
1) VHF NAV-2 VOR/ILS
S 424-076
(3) Install the antenna transfer relay:
(a)
Align the relay to the holes in the shelf.
(b)
Install the screws to attach the relay to the shelf.
(c)
If it is necessary: Install the RF attenuator on the relay (Ref 34-31-91/401).
(d)
Connect the coaxial cables and electrical cables to the relay and tighten with your hand.
S 864-150
(4) For the ILS transfer relay No. 1: Remove the DO-NOT-CLOSE tag and close this circuit breaker:
(a) P18 Load Control Center - Left
1) VHF NAV-1 VOR/ILS
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH EFIS ú 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 導航 NAVIGATION 3(31)
