(c)  
Remove the PTT switch from the switch mount.

 TASK 23-51-41-404-002
 3.  Control Wheel Push-To-Talk (PTT) Switch Installation (Fig. 401)____________________________________________________
 A. General
 (1)  
This task installs the PTT switch on the control wheel.

 (2)  
This task has these parts:

 (a)  
An installation of a PTT switch on the PTT switch assembly.

 (b)  
An adjustment of the PTT switch in the PTT switch assembly prior to installation into the control wheel. 1) The adjustment is different for airplanes with or without a

 detent plate for the lower INT switch position.

 (c)  
An installation of the PTT switch assembly to the control wheel.

 B. Access
 (1)  Location Zone
 101 Control Cabin - Left
 102 Control Cabin - Right

 C. Procedure
 S 424-015
 (1)  Install the PTT switch on the PTT switch assembly:
 (a)  
Put the PTT switch in the mount on the switch mount.

 (b)  
Turn the PTT switch clockwise until the switch stays in the switch mount.

 S 824-016
 (2)  AIRPLANES WITHOUT DETENT PLATE;
 AIRPLANES WITH DETACHED DETENT PLATE;
 Adjust the PTT switches in the PTT switch assembly:

 (a)  
Turn the top PTT switch (MIC) in the switch mount until the switch body just touches the switch mount.

 (b)  
Turn the bottom PTT switch (INT) until the switch just touches the trigger.

 (c)  
Turn the bottom PTT switch clockwise 1/4 turn + or - 1/8 turn to preload the switch button.

 (d)  
Tighten the locking screw in the switch mount.

 S 824-017
 (3)  AIRPLANES WITH DETENT PLATE ON SWITCH MOUNT;
 Adjust the PTT switches in the PTT switch assembly:

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 23-51-41
 ALL  ú ú 01 Page 403 ú Nov 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 (a)  
Turn the top PTT switch (MIC) in the switch mount until the switch button touches the trigger.

 (b)  
Continue to turn the PTT switch until the ball in the bullet catch on the trigger just touches the switch detent.

 (c)  
Turn the bottom PTT switch (INT) until the switch just touches the trigger.

 (d)  
Turn the bottom PTT switch counterclockwise 1/4 turn.

 (e)  
Tighten the locking screw in the switch mount.

 S 424-018
 (4)  Install the push-to-talk (PTT) switch assembly to the control wheel:
 (a)  
Connect the terminal lugs to the switches.

 1)  Make sure you install the correct wire on the correct terminal.

 (b)  
Carefully push the switch assembly into the control wheel.

 (c)  
Install and tighten the two mounting screws on the control wheel.

 S 824-019
 (5)  
AIRPLANES WITH DETACHED DETENT PLATE;
 AIRPLANES WITH DETENT PLATE ON SWITCH MOUNT;
 Do this task: Bullet Catch Adjustment.

 S 864-006

 (6)
Remove the DO-NOT-CLOSE tag and close the circuit breakers:

 (a)  P6 Load Control Center - Right
 1) C83, CAPT AUDIO
 2) C86, F/O AUDIO

 (7)
Do this task: Push-To-Talk (PTT) Switch Installation Test.

 S 714-007
 TASK 23-51-41-824-021
 4.  Catch Ball Adjustment_____________________
 A.  General
 (1)  Use this procedure when the PTT switch will not stay in the bottom (INT) detented position.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 23-51-41
 ALL  ú ú 02 Page 404 ú Nov 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 (2)  You may need to replace the detent plate or switch mount if the PTT switch will not stay in the detented position.
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機(jī)維護(hù)手冊 通訊 COMMUNICATIONS(94)