FIXED PARTITIONS - DESCRIPTION AND OPERATION
1.  General
A.  The control cabin partition divides the control cabin from the forward end of the passenger cabin. A rearward-opening door is in the center of the partition. The right side of the partition is of sheet metal, the left side is of fiberglass.
B.  The lavatory compartments are enclosed by fixed partitions, and each is equipped with a door opening inboard. The partitions are of fiberglass with a phenolic core. The door has fiberglass skin with paper honeycomb.
500 
Apr 15/66  BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details.  53-22-0 Page 1 

AUXILIARY FUEL TANK STRUCTURE - MAINTENANCE PRACTICES
EFFECTIVITY
GJ B-2524
1. General
A.  A 391-gallon auxiliary fuel tank is installed in the forward section of the aft cargo compartment. A removable bulkhead is installed between the auxiliary fuel tank structure and the aft cargo compartment.
B.  The auxiliary fuel tank structure consists of one module which forms a cavity for the fuel cell which is secured within it. The structure is suspended from main deck floor structure by four attachment fittings secured to the upper corners of the tank. These fittings restrain vertical and side motion of tank (Fig. 201). Fore and aft motion of tank is restrained by turnbuckle braces extending diagonally from left and right body structures to each side of tank structure.
C.  Access to top of tank may be gained from above by removing main deck floor panels as necessary to reach forward top attachment fittings, fuel plumbing and tank vent. The rear side of tank and aft top attachment fittings are accessible after removing aft cargo compartment forward bulkhead.
D.  The auxiliary fuel tank may be moved aft for inspection and access or for removal by disconnecting plumbing and electrical equipment, lowering tank structure with fuel cell and interior plumbing installed, and moving tank assembly aft on ball mat rollers or their equivalent (Ref par. 4).
E.  In order to remove module from aft cargo compartment, aft cargo compartment door must be removed. Also, when module is to be removed, tank hanger fittings and drain pan must be removed.
F.  Paragraph 3 contains information on the preparation required for either removal, or shift for access, of the auxiliary fuel tank.
G.  Leakage check of auxiliary tank cavity is performed after installation and sealing of the cavity prior to installation of the fuel cell. The requirement of this check is that there shall be no evidence of leakage in the cavity (Ref par. 6).
2.  Equipment and Materials
A.  4 x 4 wooden timbers approximately 10 feet long to support the tank structure during assembly (2 required)
B.  Plywood shoring
5C8
Feb 20/89 53-23-1 Page 201
BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details.

L10195L10198
Auxiliary Fuel Tank Installation  504 
53-23-1  Figure 201 (Sheet 1)  May 15/81 
Page 202 
BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details. 

504  Auxiliary Fuel Tank Installation 
May 15/81  Figure 201 (Sheet 2)  53-23-1 
Page 203 
BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details. 

C.  Plug for drain fitting
D.  Coverplate for sump drain shroud top
E.  Air pressure source capable of providing 5-psi pressure in cavity drain system
F.  Solvent - Methyl Ethyl Ketone (MEK)
G.  Ratchet buckle with hook - 5000-pound capacity, 4 required, commercially available
H.  Ball roller mats for moving tanks - local manufacture
I.  Sealant - BMS 5-32, Class B
3.  Prepare for Auxiliary Fuel Tank Shift Aft or Auxiliary Fuel Tank Removal
A.  Defuel auxiliary fuel tank (Ref Chapter 28, Fuel).
B.  Remove forward bulkhead in aft cargo compartment (Ref Chapter 25, Cargo Compartments).
C.  Remove passenger seats from station 700 to 770 approximately.
D.  Remove carpeting between LBL 45.50 seat tracks and RBL 45.50 seat tracks from stations 700 to 770 approximately (Ref Chapter 25, Interiors).
NOTE:  Carpets may have to be cut. If cutting is not desired, remove seats forward of station 700 and take up carpet to joint or roll carpet forward out of way.
E.  Remove floor panels between stations 700 and 770 approximately for access to top of tank.
F.  For auxiliary Fuel tank removal, remove aft cargo compartment door (Ref Chapter 52, Cargo Compartment Doors).
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737 AMM 飛機(jī)維護(hù)手冊 機(jī)身 FUSELAGE(10)