- Transfer Control Valve 2 (Right) does not close
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
28-26-00-810-804 Fuel, Main Transfer System - Control Valve 1 (Left) Does Not Close 28-26-00-810-805 Fuel, Main Transfer System - Control Valve 2 (Right) Does Not Close AMM 28-26-00-710-001 Operational Test of the Main Transfer System
3. Fault Confirmation
__________________
A. Do the Operational Test of the Center Tank, Transfer Control Valves (Ref. AMM TASK 28-26-00-710-001).
4. Fault Isolation
_______________
A. If both of the Transfer Valves do not close see:
- (Ref. TASK 28-26-00-810-804) for the Transfer Control Valve 1 (Left) does not close
- (Ref. TASK 28-26-00-810-805) for the Transfer Control Valve 2 (Right) does not close.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : 301-399, ∞∞28-26-00∞∞∞∞∞∞∞∞∞∞Page 206
May 01/04 CES
TASK 28-26-00-810-803
Fuel, Main Transfer System - Both Control Valves Do Not Open
WARNING : OBEY THE FUEL SAFETY PROCEDURES.
_______
1. Possible Causes
_______________
- Transfer Control Valve 1 (Left) does not open
- Transfer Control Valve 2 (Right) does not open
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
28-26-00-810-806 Fuel, Main Transfer System - Control Valve 1 (Left) Does Not Open 28-26-00-810-807 Fuel, Main Transfer System - Control Valve 2 (Right) Does Not Open AMM 28-26-00-710-001 Operational Test of the Main Transfer System
3. Fault Confirmation
__________________
A. Do the Operational Test of the Center Tank, Transfer Control Valves (Ref. AMM TASK 28-26-00-710-001).
4. Fault Isolation
_______________
A. If both of the Transfer Valves do not open see:
- (Ref. TASK 28-26-00-810-806) for the Transfer Control Valve 1 (Left) does not open
- (Ref. TASK 28-26-00-810-807) for the Transfer Control Valve 2 (Right) does not open.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : 301-399, ∞∞28-26-00∞∞∞∞∞∞∞∞∞∞Page 207
May 01/04 CES
TASK 28-26-00-810-804
Fuel, Main Transfer System - Control Valve 1 (Left) Does Not Close
WARNING : OBEY THE FUEL SAFETY PROCEDURES.
_______
WARNING : WHEN YOU DO WORK ON THE FUEL SYSTEM WIRING, YOU MUST USE TEST
_______ EQUIPMENT THAT IS APPROVED (REFER TO INTERNATIONAL OR NATIONAL SPECIFICATIONS FOR INTRINSICALLY SAFE TEST EQUIPMENT, E.G. EN50-020, UL913 OR EQUIVALENT). TEST EQUIPMENT THAT IS NOT APPROVED CAN CAUSE FIRE OR AN EXPLOSION.
1. Possible Causes
_______________
- ACTUATOR-JET PUMP 1 CONTROL VALVE, CTR TK (11QL)
- DIODE (2408VD)
- P/BSW-FUEL/CTR TK/L XFR (5QL)
- C/B-FUEL/CTR TK/L & R XFR/CTL & IND (1QL)
- the aircraft wiring between the pin B, of the actuator supply cable connector and the terminal 13, of the diode 2408VD
- the aircraft wiring between the terminal 28, of the diode 2408VD and the terminal B2, of the P/BSW (5QL)
- aircraft wiring between the terminal B3, of the P/BSW (5QL) and the C/B (1QL)
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific multimeter
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 28-26-00-710-001 Operational Test of the Main Transfer System
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 FUEL 燃油2(92)
