Burr

Backed outExcessive play Excessive back-lash Insufficient torque Shaky Sloppy Unbottomed Unpinned Unwired
EccentricOut-of-roundOut-of-squareMismatchedUnmatched
ChipDentNotch
 F 『 EEFF : ALL E Page 870-00-00
 E E Feb 01/98 E E ECES E -------------------------------------------------------------------------------TERM DEFINITION ASSOCIATED TERMS -------------------------------------------------------------------------------

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

No apparent  Term used to describe surface
 Depth  defects that can be seen but not felt with fingernail or scriberpoint.
 Noise  An abnormal sound involving moving parts, usually an increase in volume or a change of pitch.
Obstruction  Prevention of free flow of a fluid (air, oil, fuel, water) because of foreign material in the flowpath or malformation of the part.
Oil-canning  Snapping or popping displacement
(Snapping  of sheet metal when restrained at
 action)  its edges like a diaphragm, wall, or bottom of an oil can.
 Parent Metal  All material in a single part except the weld, braze filler, or heat-affected zone (within 1/8 inch (3.175 mm) of the fusion line).
 Pickup  Transfer of one material into or onto the surface of another in contact with it, usually as a result of friction-heating.
Bumps (sound)ChattersClicks Grates (usually gears) Grinds Hums Rattles Rubs Scrapes (sound) Screeches Thumps Whistles
CloggedContaminatedPluggedRestricted
Buckling
BurrGallImbedmentInclusion Pile-up Protrusion Metallization
 F 『 EEFF : ALL E Page 970-00-00
 E E Feb 01/98 E E ECES E -------------------------------------------------------------------------------TERM DEFINITION ASSOCIATED TERMS -------------------------------------------------------------------------------Pinched Distortion of one or more surfaces Bound

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

 of the parent material, caused by pressure.  CompressedFlattened Seized
 Smashed (without separation into pieces) Squashed Squeezed
 Pit  A minute depression or cavity having no sharp, high-stress corners in the surface of the material. Pits are usually caused by chemical reaction (rusting, chemical corrosion).  CorrosionCraterElectrolytic cavityInclusionPerforationPinholes Pock-marked
 Porosity  Areas containing numerous pits or pinholes.  PitPinholes
 Rub  A surface depression or displacement caused by two surfaces moving while in contact with each other.  If impression is shallowand smooth, see "Wear".If impression is sharp,see "Scratch".
 Scale  A layer of metallic oxides formed by chemical action of oxygen on the exposed surface of the metal, usually while hot. Burn
 Scratch  A long, narrow, sharp-cornered impression caused by the movement of a sharp object across the surface of the parent material.  AbrasionChafeFurrowGroove Score
 Seizure  A welding or binding of faces which prevent further movement.  Bound upFrozen Tight Wedged Welded (without external heating).

 F 『 EEFF : ALL E Page 1070-00-00
 E E Feb 01/98 E E ECES E -------------------------------------------------------------------------------TERM DEFINITION ASSOCIATED TERMS -------------------------------------------------------------------------------

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

Shingling  A condition when one fan blade mid-span shroud moves over the other (usually when something hits the fan). The condition can also occur to the blade tip shrouds on the LPT rotor (Stg. 3 and 4). The condition on the LPT is usually caused by a loss of pre-twist, too much radial movement, etc.
 Spalling  Cracking off or flaking off of small particles of metal from the surface, usually in thin layers or localized spots.
 Tear  A physical separation by tearing, pulpulling apart by force, or wrenching of metal.
 Unbalance  The act of putting a balanced component out of balance. Usually "imbalance" is meant.
 Varnish film  A hard surface-film of partially carbonized hydrocarbon, such as oil, which is built up when the part is heated to or above the breakdown-point of the fluid.
 Wear  Relatively slow removal of parent material in the process of operation (not always visible to the naked eye). 

Wedged Bound up Shingled

FlakingFrettingGalling
BandedDiscoloredOxidizedStained
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM STANDARD PRACTICES - ENGINES(6)