曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

R  (internal): 
R  - BONDING AND ADHESIVE COMPOUNDS (Material No. 08-008) 
R  - STRUCTURE PAINTS (Material No. 16-040) 
R  - STRUCTURE PAINTS (Material No. 16-001) 
R  - STRUCTURE PAINTS (Material No. 16-018) 
R  (8) Apply the materials that follow in the sequence given to the area D7: 
R  - BONDING AND ADHESIVE COMPOUNDS (Material No. 08-008) 
R  - STRUCTURE PAINTS (Material No. 16-001) 
R  - STRUCTURE PAINTS (Material No. 16-020) 
R  - STRUCTURE PAINTS (Material No. 16-001) 
R  - STRUCTURE PAINTS (Material No. 16-018) 
R  (9) Apply the moisture-removing oil coatings. 
R  (a) Apply the material that follows to the areas that are shown: 
R  - STORAGE PRESERVATION (Material No. 15-004)
 5. Close-up________
 Subtask 51-23-00-410-052
 A. Close Access
 (1) Make sure that the work area is clean and clear of tool(s) and other
 items.
 (2) Remove the access platform(s).
 (3) Remove the warning notice(s).
 (4) Remove the ground support and maintenance equipment, the special and
 standard tools and all other items.

 TASK 51-23-00-370-004

 Application of Paint and Protective Coatings - Wing Areas
 WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROL SURFACES ARE
_______ CLEAR BEFORE YOU PRESSURIZE/DEPRESSURIZE A HYDRAULIC SYSTEM.
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL MATERIALS
_______ ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
 WARNING : DO NOT GET THE COMPOUND ON YOUR SKIN.
_______ IF YOU DO:
 -RUB IT OFF IMMEDIATELY WITH A CLEAN CLOTH
 -WASH THE SKIN WITH SOAP AND RINSE WITH CLEAN WATER.
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 No specific 1 ACCESS PLATFORM 4M (13 FT)
 No specific 4 WARNING NOTICE

 

 B. Consumable Materials

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 07-003
 Material No. 07-004 Material No. 07-005 Material No. 08-008 Material No. 16-001 Material No. 16-002
Material No. 16-006B
Material No. 16-006C Material No. 16-018 Material No. 16-018B
 Material No. 16-020
ABRASION RESISTANT COATING (TEFLON POLYURET)
 (Ref. 20-31-00)

 CORROSION RESISTANT COATING (Ref. 20-31-00)
C Z-12.506
 ANTISTATIC PAINT (LOW RESISTIVITY) (Ref. 20-31-00)
D DA4-653-83
 POLYESTER FILLER (Ref. 20-31-00)

 ANTI-CORROSION PRIMER (POLYURETHANE ) (Ref. 20-31-00)
GB BAEP 3536
 POLYURETHANE TOPCOAT GREY (FOR INTERNAL APPLIC.)
 (Ref. 20-31-00)
C Z-12.113
 ANTI-CORROSION PRIME R (EPOXY-IMPROVED ADHESION)
 (Ref. 20-31-00)

 IMPROVED ADHESION EPOXIDE PRIMER (Ref. 20-31-00)

 EXTERNAL TOP COAT (POLYURETHANE) (Ref. 20-31-00)

 POLYURETHANE FINISH PAINT (FOR EXTERNAL APPLIC.)
 (Ref. 20-31-00)
C Z-12.120
 WASH PRIMER (Ref. 20-31-00)

 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
29-10-00-864-001  Depressurize the Green Hydraulic System
 29-10-00-864-002  Depressurize the Yellow Hydraulic System
 29-10-00-864-003  Depressurize the Blue Hydraulic System
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM STANDARD PRACTICES AND STRUCTURES(13)