R (4) Apply the protective coatings to the stringers in the area B.
R R R (a) Apply the materials that follow in the given sequence: - CAA UNSEALED - PRETREATMENT FOR PAINTING (Material No. 13-002)
R (5) Apply the protective coating to the items that follow in the area C: - skin panels - stingers - frames and cleats - butt straps.
R R (a) Apply the material that follows: - CAA UNSEALED
Subtask 51-23-00-370-050
B. Application of the Paint
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
WARNING : DO NOT GET THE COMPOUND ON YOUR SKIN._______ IF YOU DO: - RUB IT OFF IMMEDIATELY WITH A CLEAN CLOTH - WASH THE SKIN WITH SOAP AND RINSE WITH CLEAN WATER.
(1) Apply the material that follows to the area A: - STRUCTURE PAINTS (Material No. 16-006)
(2) Apply the materials that follow in the given sequence to the area B: - STRUCTURE PAINTS (Material No. 16-006) - STRUCTURE PAINTS (Material No. 16-002)
(3) Apply the materials that follow in the given sequence to the area C: - STRUCTURE PAINTS (Material No. 16-006) - STRUCTURE PAINTS (Material No. 16-002) - STORAGE PRESERVATION (Material No. 15-004)
R (4) Apply the moisture-removing oil coatings.
R R R (a) Apply the materials that follow to the areas that are shown: - STORAGE PRESERVATION (Material No. 15-004) - STORAGE PRESERVATION (Material No. 15-007)
5. Close-up________
Subtask 51-23-00-410-053
A. Close Access
(1) Install the air-conditioning distibution ducts (Ref. TASK 21-20-00-410-001).
R (2) Install the insulation blankets (Ref. TASK 25-80-00-400-001). - around the frame of the passenger/crew doors - below stringer 18, between FR1 and FR70.
(3) Aft Cargo Compartment
(a) Make sure that the work area is clean and clear of tool(s) and other items.
R R (b) Install the ceiling panels in the aft cargo-compartment (Ref. TASK 25-55-12-400-002).
R (c) Install the floor panels in the aft cargo-compartment (Ref. TASK 53-42-14-400-001).
(d) Install the sidewall panels in the aft cargo-compartment (Ref. TASK 25-55-12-400-003).
R (e) Install the aft cargo-compartment partition at FR47 (Ref. TASK 25-55-11-400-001).
R (f) Install the aft cargo-compartment partition at FR65 (Ref. TASK 25-55-12-400-001).
(g) Close the aft cargo-compartment door 826 (Ref. TASK 52-30-00-860-004).
(4) Forward Cargo Compartment
(a) Make sure that the work area is clean and clear of tool(s) and other items.
(b)
Install the forward cargo-compartment partition at FR34 (Ref. TASK 25-54-12-400-001).
(c)
Install the forward cargo-compartment partition at FR24 (Ref. TASK 25-54-11-400-001).
(d)
Install the sidewall panels in the forward cargo-compartment (Ref. TASK 25-54-12-400-003).
(e)
Install the floor panels in the forward cargo-compartment (Ref. TASK 53-22-14-400-001).
(f)
Install the ceiling panels in the forward cargo-compartment (Ref. TASK 25-54-12-400-002).
(g)
Close the forward cargo-compartment door 825 (Ref. TASK 52-30-00-860-004).
(5) Cabin
(a)
Make sure that the work area is clean and clear of tool(s) and other items.
(b)
Install the floor panels from FR12 to FR24 (Ref. TASK 53-12-12-400-001).
(c)
Install the floor panels from FR24 to FR35 (Ref. TASK 53-22-12-400-001).
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM STANDARD PRACTICES AND STRUCTURES(10)
