__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 3.5 m (11 ft. 6 in.) No specific Torque Wrench : range 0.00 to 1.20 m.daN
 (0.00 to 9.00 lbf.ft)
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 03-002  GB DEF-STAN 91-101 LUBRICATING OIL TURBINE ENGINE SYNT BASE (Ref. 20-31-00)
 C. Expendable Parts
 -------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
12 packing 49-52-04 30 -120 14 packings 49-52-04 30 -140

 D. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from the External Power 29-00-00-864-001 Put the Related Hydraulic System in the Depressurized Configuration before Maintenance Action 29-14-00-614-002 Pressurization of the Hydraulic Reservoirs through
 the Ground Connector 49-00-00-710-004 Operational Test of the APU (4005KM) (GTCP 36-300) 49-00-00-910-001 Safety Precautions for the Operation of the APU
 (4005KM) (GTCP 36-300) 49-90-00-600-001 Check Oil Level and Replenish (GTCP 36-300) 52-41-00-010-001 Open the APU Doors for Access 52-41-00-410-001 Close the APU Doors after Access 49-52-51-991-001 Fig. 401
 3. Job Set-up
__________
 Subtask 49-52-51-941-051
 A. Safety Precautions
 (1) Obey the safety precautions for the operation of the APU (Ref. TASK 49-00-00-910-001).
 Subtask 49-52-51-860-051
 B. Aircraft Maintenance Configuration
 (1)
 Energize the ground service network
 (Ref. TASK 24-42-00-861-001).

 (2)
 On the panel 25VU make sure that the APU MASTER SW p/bsw is OFF.

 (3)
 Make sure that there is a warning notice in the cockpit to tell persons not to start the APU.

 (4)
 Make sure that hydraulic systems are depressurized
 (Ref. TASK 29-00-00-864-001).

 Subtask 49-52-51-865-051
 C. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU APU/APU/CTL 2KD L42 121VU APU/ECB/SPLY 1KD L41
 Subtask 49-52-51-010-054
 D. Get Access
 (1)
 Put the access platform in position below the APU access doors 315AL and 316AR.

 (2)
 Open the APU access doors 315AL and 316AR (Ref. TASK 52-41-00-010-001).

 (3)
 Make sure that the light SW 11LJ is set to the ON position.

 4. Procedure
_________ (Ref. Fig. 401/TASK 49-52-51-991-001) Subtask 49-52-51-420-051
 A. Installation of the Fan Assembly (8053KM)
 (1)
 Examine the fan discharge duct for cracks and broken welds. Replace the discharge duct if necessary.

 (2)
 Examine the fan inlet duct for cracks or damage. Replace the inlet duct if necessary.

 (3)
 Examine the fan stator vanes for cracks and damage.

 (4)
 Examine the mounting flange for damage or cracks.

 (5)
 Apply a thin layer of lubricant OILS (Material No. 03-002) to the new packings (14).

 (6)
 Install the new packings (14) on the transfer tube (13).

 (7)
 Install the transfer tube (13) into the cooling fan assembly (8053KM) (11).

 (8)
 Apply a thin layer of lubricant OILS (Material No. 03-002) to the new packing (12).

 (9)
 Install the new packing (12) on the cooling fan assembly (8053KM)
 (11).

 (10)
 Remove the blanking caps from the ducts and the gearbox fan assembly flange.

 (11)
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 機載輔助動力 AIRBORNE AUXILIARY POWER5(55)