(6)
 Make sure that the electrical connectors are clean and in the correct condition.

 (7)
 Connect the electrical connectors (4) with the insertion/removal tool M15.570-20.

 CAUTION : REFER TO THE MATCH MARKS MADE DURING THE REMOVAL WHEN YOU
_______
 CONNECT THE ELECTRICAL WIRES. R INCORRECT CONNECTION OF THE WIRES WILL CAUSE DAMAGE TO R EQUIPMENT.
 (8)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (9)
 Lift and engage the oxygen container (3) on the rail (2).

 (10) Install the hose sections (1) with the PULLEY ASSEMBLY - SEALING CORD tool.
 NOTE : Use the roller along the hose sections in both directions.
____ Make sure that the joints of the hose sections do not align with the joints between the panels.
 EFF : ALL

35-21-41Page 415

 (11) Make sure that there is a minimum clearance of 2.0 +0.0 -0.5 mm (0.0787 +0.0000 -0.0196 in.) at each side of the oxygen container door.
 Subtask 35-21-41-420-051
 C. Install the emergency oxygen container(s) in the passenger/crew door frame(s).
 NOTE : During installation, make sure that the hinge of the oxygen
____ container is adjacent to the upper side of the fuselage.
 NOTE : The installation procedure is the same for all the emergency
____
 oxygen containers installed in the door frames.

 (1)
 Make sure that the parts retained from the removed component are clean and in the correct condition.

 (2)
 Do an inspection of the component interface and/or the adjacent area.

 (3)
 Put the oxygen container (13) in position.

 (4)
 Engage the oxygen container (13) in the support assembly (14).

 (5)
 Put the support (12) in position and install the washers (16) and the screws (17).

 (6)
 Tighten the screws (18).

 (7)
 Remove the blanking caps from the electrical connectors.

 (8)
 Make sure that the electrical connectors are clean and in the correct condition.

 (9)
 Connect the electrical connectors (15) with the insertion/removal tool M15.570-20.

 CAUTION : REFER TO THE MATCH MARKS MADE DURING THE REMOVAL WHEN YOU
_______
 CONNECT THE ELECTRICAL WIRES. R INCORRECT CONNECTION OF THE WIRES WILL CAUSE DAMAGE TO R EQUIPMENT.
 (10) Make sure that there is a minimum clearance of 2.0 +0.0 -0.5 mm (0.0787 +0.0000 -0.0196 in.) at each side of the oxygen container door.
 EFF : ALL

35-21-41Page 416

 **ON A/C 001-049, 051-099, 101-149, 201-299,
 Subtask 35-21-41-420-052
R  D. Install the emergency oxygen container in the lavatory. 
R R  (1) During installation, make sure that the latch assembly of the oxygen container points to the electrical connectors. 
R  (2) Make sure that the parts retained from the removed component are clean and in the correct condition. 
R  (3) Do an inspection of the component interface and/or the adjacent area. 
R R (4) For all lavatories: 
(a) Put the oxygen container (11) in position and install the washers (6) and the screws (5).
 (b) Remove the blanking caps from the electrical connectors.
 (c) Make sure that the electrical connectors are clean and in the correct condition. 
R R  (d) Connect the electrial connectors (4) and (7) with the insertion/removal tool M15.570-20.
 CAUTION : REFER TO THE MATCH MARKS MADE DURING THE REMOVAL WHEN_______ YOU CONNECT THE ELECTRICAL WIRES. INCORRECT CONNECTION OF THE WIRES WILL CAUSE DAMAGE TO EQUIPMENT. 
R  (5) For the lavatory A only. 
R  (a) Install the O2-box cover color panel(21). 
R R  (b) Install the screws (19) and the washers (20) at the O2-box cover color panel (21). 
R  (c) Make sure that the dowels (22) are in the correct position.

 CES

R (d) Make sure that there is a minimum clearance of 2.0 +0.0 -0.5 mm (0.0787 +0.0000 -0.0196 in.) at each side of the oxygen container door.
R **ON A/C 151-199, 301-399, 401-499,
 Subtask 35-21-41-420-052-A
 D. Install the emergency oxygen containers in the lavatories. NOTE : During installation, make sure that the latch assembly of the
____ oxygen container points to the electrical connectors.
 (1)
 Make sure that the parts retained from the removed component are clean and in the correct condition.

 (2)
 Do an inspection of the component interface and/or the adjacent area.

 (3)
 Put the oxygen container (11) in position and install the washers (6) and the screws (5).
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM OXYGEN 氧氣(69)