(2)
 Do the ADIRS stop procedure (Ref. TASK 34-10-00-860-005).

 (3)
 De-energize the aircraft electrical circuits
 (Ref. TASK 24-41-00-862-002).

 (4)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (5)
 Make sure that the drain holes on the pitot probes are not blocked by unwanted materials. (Ref. TASK 34-11-15-200-001)

 1EFF : ALL 1 34-13-00Page 587 1 1 May 01/05 1 1 1CES 1 TASK 34-13-00-740-002

 INTERFACE TEST of the ADR
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 No specific safety barriers
 No specific access platform 1.6 m (5 ft. 3 in.)

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 31-32-00-860-010 Procedure to Get Access to the SYSTEM REPORT/TEST NAV
 Page 31-60-00-860-001 EIS Start Procedure 31-60-00-860-002 EIS Stop Procedure
 3. Job Set-up
__________
 Subtask 34-13-00-860-077
 A. Aircraft Maintenance Configuration
 (1)
 Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).

 (2)
 On the center pedestal, on the MCDU, get the SYSTEM REPORT/TEST/NAV page (Ref. TASK 31-32-00-860-010).

 1EFF : ALL 1 34-13-00Page 588 1 1 May 01/05R 1 1 1CES 1

 (3)
 Do the EIS start procedure (Ref. TASK 31-60-00-860-001).

 (4)
 On the overhead panel: - on the FLT CTL panels 23VU and 24VU, release the FAC,ELAC and SEC pushbutton switches. The OFF legends are on. - on the ADIRS CDU, make sure that the 3 OFF/NAV/ATT selectors are at off

 - on the ELEC panel 35VU, make sure that the battery voltage is correct, between 26VDC and 30VDC.

 (5)
 On the center pedestal, on the ECAM control panel, push the STS key.

 (6)
 On the glareshield 13VU, on the CAPT and F/O EFIS control sections of the FCU, set the mode selector switch to ROSE/NAV.

 (7)
 Put the safety barriers in position around the RAT area. NOTE : This test is for the system 1. For the systems 2 and 3, use

____
 the indications between parentheses.

 Subtask 34-13-00-010-055
 B. Get Access
 (1)
 Put the access platform in position at the access door 822.

 (2)
 Open the access door 822.

 (3)
 On the battery power center 105VU:

 -loosen the two screws and remove the protective cover.
 1EFF : ALL 1 34-13-00Page 589 1 1 May 01/05R 1 1 1CES 1

 Subtask 34-13-00-865-089
 C. Make sure that this(these) circuit breaker(s) is(are) closed:
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
49VU AUTO FLT/FCU/1 49VU L/G/LGCIU/SYS1/NORM 49VU NAV PROBES/ADIRU3/PWR/SWTG 49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 49VU NAV PROBES/ADIRU1/115VAC 105VU ADIRS/ADIRU1/28VDC  9CA1 1GA 8FP 5FP1 4FP1 6FP1  B05C09F09F07F06C02
 **ON A/C 001-049, 051-061, 101-105, 201-203,
 121VU ADIRS/ADIRU/2PWR/SHED 121VU ADIRS/ADIRU/3PWR/SWTG 121VU ADIRS/ADIRU/2/26VAC AND AOA 121VU ADIRS/ADIRU/3/26VAC AND AOA 121VU ADIRS/ADIRU/2/115VAC 121VU ADIRS/ADIRU/3/115VAC 121VU ADIRS/ADIRU/2/28VDC 121VU ADIRS/ADIRU/3/28VDC  10FP 9FP 5FP2 5FP3 4FP2 4FP3 6FP2 6FP3  N11N10N09N08N07N06N05N04
 **ON A/C ALL
 121VU AUTO FLT/FCU/2 121VU HYDRAULIC/LGCIU/SYS2 121VU HYDRAULIC/LGCIU/SYS1/GRND SPLY  9CA2 2GA 52GA  M21Q35Q34 
R  **ON A/C 062-099, 106-149, 151-199, 204-299, 301-399, 401-499,
 121VU ADIRS/ADIRU/2PWR/SHED 121VU ADIRS/ADIRU/3PWR/SWTG 121VU ADIRS/ADIRU/2/26VAC AND AOA 121VU ADIRS/ADIRU/3/26VAC AND AOA 121VU ADIRS/ADIRU/2/115VAC 121VU ADIRS/ADIRU/3/115VAC 121VU ADIRS/ADIRU/2/28VDC 121VU ADIRS/ADIRU/3/28VDC  10FP 9FP 5FP2 5FP3 4FP2 4FP3 6FP2 6FP3  N10N09N08N07N06N05N04N03

 1EFF : ALL 1 34-13-00Page 590 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM NAVIGATION 導航2(9)