Subtask 34-13-00-865-091
 D. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU AUTO FLT/FAC1/28VDC 5CC1 B04 105VU ELEC/CSM/G /EV AUTO/SPLY 7XE C01 121VU AUTO FLT/FAC2/28VDC 5CC2 M19
 4. Procedure
_________

R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
 Subtask 34-13-00-740-050
 A. INTERFACE TEST of the ADR
 NOTE : - Ignore the warnings and indications (VLE, ...) which are not
____
 related to this interface test.

 -When you test the ADR3, set the AIR DATA selector switch 15FP, on the SWITCHING panel 8VU, to CAPT/3.
 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the ADIRS CDU:
 -Set the three OFF/NAV/ATT
 selector switches to NAV

 -
push the ADR1, ADR2 and ADR3  The OFF legend of the ADR1, ADR2 and pushbutton switches ADR3 pushbutton switches comes on.

 -
push the ADR1 (ADR2) (ADR3),  On the ADIRS CDU, the OFF legend of the only if the AIR DATA selector ADR pushbutton switch goes off switch is to CAPT/3 or F/O/3) On the CAPT (F/O) PFD, the SPD and ALT pushbutton switch again. flags go out of view. The speed and

 altitude indications (30 Kts and local altitude) are shown
R 1EFF : ALL 1 34-13-00Page 591 1 1 May 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
2. On the MCDU:
 -
push the line key adjacent to the ADR1 (ADR2) (ADR3) indication

 -
push the line key adjacent to the OUTPUT TESTS indication.

-
push the line key adjacent to the INTERFACE TEST indication

- on the keyboard push the NEXT PAGE function key.

-
push the line key adjacent to the START TEST indication

On the lower ECAM display unit, the local temperature values SAT and TAT are shown (only with ADR2 set).
-
the ADR1 (ADR2) (ADR3) page comesinto view.

-
the ADR1 (ADR2) (ADR3) OUTPUT TESTSpage comes into view.

-
the ADR1 (ADR2) (ADR3) INTERFACE TEST1/2 page comes into view.

-
the ADR1 (ADR2) (ADR3) INTERFACE TEST2/2 page comes into view.

From 0 to 5 seconds:
- on the ADIRS CDU, the FAULT and OFF legends of the ADR1 (ADR2) (ADR3) pushbutton switch come on then go off
 - on the CAPT (F/O) PFD, the symbols on the speed and altitude scale go out of view. The SPD and ALT warning flags flash for some seconds
 - on the CAPT (F/O) ND, the TAS indication goes out of view From 5 to 10 seconds:
 - on the CAPT (F/O) PFD, the warnings go out of view
 - on the lower ECAM display unit, in the Inop System part, the message ADR 2 + 3 (ADR 1 + 3) (ADR 1 + 2) comes into view.
 - on the CAPT (F/O) PFD, the altitude increases. After 10 seconds:
 - on the CAPT (F/O) PFD, these values are shown: CAS: 367.7 Kts MACH: 0.66 M ALTITUDE: 10000 Ft
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 34-13-00Page 592 1201-299, 301-302, 1May 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
- on the CAPT (F/O) ND, this value is shown:
 TAS: 433 Kts
 - on the lower ECAM display unit, (if ADR2 set) these values are shown: TAT: + 35 deg. C SAT: + 10 deg. C - on the upper ECAM display unit, this indication is shown:
 OVERSPEED
 VMO/MMO 350/.82
 - push the line key adjacent to the RETURN indication.  The test procedure stops:- on the upper ECAM display unit, the OVERSPEED warning indication goes out of view
 - on the CAPT (F/O) PFD, the speed and altitude indications go back to their initial value
 - on the lower ECAM display unit, the TAT and SAT values show the local
 temperature (only with ADR2 set).
 3. On the ADIRS CDU, push the ADR2 pushbutton switch.  On the ADIRS CDU, the OFF legend of theADR2 pushbutton switch goes off
 4. Do the ADR2 test as specified in the para. 1 and 2. Same results on the F/O side.
 5. On the ADIRS CDU:
 - push the ADR3 pushbutton switch  On the ADIRS CDU, the OFF legend of the ADR3 pushbutton switch goes off
 - push the ADR1 pushbutton switch.  On the ADIRS CDU, the OFF legend of theADR1 pushbutton switch comes on On the CAPT PFD, the speed and altitude indications go out of view.
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM NAVIGATION 導(dǎo)航2(10)