-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
R - push the ADR1 pushbutton
R switch.
R
R
R 6. On the SWITCHING panel 8VU:
R - set the AIR DATA selector
R switch to CAPT/3.
R 7. Do the ADR3 test as specified in
R the para. 1 and 2.
R 8. On the ADIRS CDU, push the ADR1
R pushbutton switch.
R 9. On the SWITCHING panel 8VU:
R - set the AIR DATA selector
R switch to NORM.
R 10. On the ADIRS CDU, set the three
R OFF/NAV/ATT selector switches to
R OFF.
R After the ADR3 test, set the AIR
R DATA selector switch 15FP to
R NORMAL.
R **ON A/C ALL
5. Close-up________
Subtask 34-13-00-860-078
On the ADIRS CDU, the OFF legend of the ADR1 pushbutton switch comes on On the CAPT PFD, the speed and altitude indications go out of view.
On the CAPT PFD, the speed and altitude indications from the ADR3 are shown.
Same results on the CAPT side.
On the ADIRS CDU, the OFF legend of the ADR1 pushbutton switch goes off
On the CAPT PFD, the speed and altitude indications stay in view.
A. Put the aircraft back to its initial configuration.
(1)
On the MCDU, push the line key adjacent to the RETURN indication until the CFDS menu page comes into view.
(2)
Do the EIS stop procedure (Ref. TASK 31-60-00-860-002).
(3)
On the FLT CTL panels 23VU and 24VU, push the FAC, ELAC and SEC pushbutton switches. The related OFF legend goes off.
R 1EFF : ALL 1 34-13-00Page 597 1 1 May 01/05 1 1 1CES 1
(4) De-energize the aircraft electrical circuits
(Ref. TASK 24-41-00-862-002).
Subtask 34-13-00-410-055
B. Close Access
(1)
Install the protective cover on the battery power center 105VU.
(2)
Tighten the two screws.
(3)
Close the access door 822.
(4) Remove the access platform(s). Subtask 34-13-00-865-092
C. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 7XE, 5CC1, 5CC2
R 1EFF : ALL 1 34-13-00Page 598 1 1 May 01/05 1 1 1CES 1
TASK 34-13-00-740-003 SYSTEM TEST of the ADR
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 1.6 m (5 ft. 3 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 31-32-00-860-010 Procedure to Get Access to the SYSTEM REPORT/TEST NAV
Page 34-10-00-860-002 ADIRS Start Procedure 34-10-00-860-005 ADIRS Stop Procedure
3. Job Set-up
__________ Subtask 34-13-00-860-079
A. Aircraft Maintenance Configuration
(1)
Energize the aircraft electrical circuits
(Ref. TASK 24-41-00-861-002).
(2)
Do the ADIRS start procedure (Ref. TASK 34-10-00-860-002).
(3) 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320飛機維護手冊 AMM NAVIGATION 導航2(12)
