R 1EFF : 001-049, 101-105, 151-199, 201-203, 1 34-11-18Page 409 1 1 May 01/05 1 1 1CES 1 NOTE : As an alternative procedure, you can do this operational test
____
without the CFDS
(Ref. TASK 34-11-18-710-001).
R **ON A/C 051-099, 106-149, 204-299, 301-399, 401-499,
Subtask 34-11-18-710-050-B
D. Do the operational test of the TAT sensor with the CFDS.
(1)
Do the operational test of the Probe Ice Protection. (Ref. TASK 30-31-00-710-001)
(2)
Do the operational test of the INPUT STATUS: NOTE : The TAT sensor 1 is related to the ADIRU 1 and 3. The TAT
____
sensor 2 is related to the ADIRU 2.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the center pedestal, on one On the MCDU:
MCDU:
- push the MCDU MENU mode key. - the MCDU MENU page comes into view.
- push the line key adjacent to - the CFDS MENU page comes into view.
the CFDS indication.
- push the line key adjacent to - the SYSTEM REPORT/TEST page comes
the SYSTEM REPORT/TEST into view.
indication.
- push the line key adjacent to - the SYSTEM REPORT/TEST NAV page comes
the NAV indication. into view.
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) page comes
the ADR1 (ADR2) (ADR3) into view.
indication (related to the
removed TAT sensor).
- push the line key adjacent to - the INPUT STATUS page comes into
the INPUT STATUS indication. view.
1EFF : ALL 1 34-11-18Page 410 1 1 Aug 01/05 1 1 1CES 1 1EFF : ALL 1 34-11-18Page 411 1 1 May 01/05 1 1 1CES 1 SENSOR - TOTAL TEMPERATURE (11FP1,11FP2) - ADJUSTMENT/TEST
R R R R -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------- push NEXT PAGE key until you - INPUT STATUS pages 3/8 and 7/8 come get ADR1 (ADR2) (ADR3)/INPUT into view: STATUS pages 3/8 and 7/8. do a check of the TAT data (OPEN, XXX . C).
R R R NOTE : As an alternative procedure, you can do this operational test____ without the CFDS (Ref. TASK 34-11-18-710-001).
**ON A/C ALL
5. Close-up________
Subtask 34-11-18-860-055
A. Put the aircraft back to its initial configuration.
(1) On the MCDU , push the MCDU MENU mode key.
(2) De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
(3) Make sure that the work area is clean and clear of tool(s) and other items.
(4) Remove the access platform(s).
__________________________________________________________
TASK 34-11-18-710-001
Test of the TAT Sensor (11FP1, 11FP2) without the CFDS
1. Reason for the Job
__________________
Do this test after the removal/installation of the TAT Sensor (11FP1,11FP2) when the CFDS is unserviceable.
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
from the External Power 34-10-00-860-005 ADIRS Stop Procedure FOR FIN 11FP2 31-60-00-860-001 EIS Start Procedure 34-10-00-860-002 ADIRS Start Procedure
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM NAVIGATION 導航1(87)
