R WARNING : DO NOT GET THE FLUID ON YOUR SKIN OR IN YOUR EYES. IF YOU DO:
_______
R - FLUSH IT AWAY WITH CLEAN WATER
R - GET MEDICAL AID.
CAUTION : MAKE SURE THAT THE FLUID DOES NOT STAY ON THE AIRCRAFT STRUCTURE. IF
_______ THE FLUID GETS ON THE AIRCRAFT STRUCTURE, WASH IT OFF IMMEDIATELY WITH SOAP AND WATER.
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific access platform 1.6 m (5 ft. 3 in.)
B. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
3 O-ring 30-45-01 04 -040 5 O-ring 30-45-01 04 -080 7 O-ring 30-45-01 04 -080 11 O-ring 30-45-01 04 -040 13 O-ring 30-45-01 04 -080 16 O-ring 30-45-01 04 -080
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
30-45-45-991-001 Fig. 401 3. Job Set-up
__________ Subtask 30-45-45-865-051
A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
49VU ANTI ICE/RAIN/RPLNT/CAPT 1DB1 01 D 122VU ANTI ICE/RAIN/RPLNT/F/O 1DB2 11 W
Subtask 30-45-45-860-050
B. Make sure that the access platform is in position. Subtask 30-45-45-010-051
C. Make sure that the access door 811 is open.
4. Procedure
_________ (Ref. Fig. 401/TASK 30-45-45-991-001) Subtask 30-45-45-420-051
A. Installation of the Check Valve and the Reservoir
(1)
Install a new O-ring (13) on the union (14).
(2)
Install the union (14) on the reservoir (9) and tighten the union.
(3)
Install a new O-ring (16) on the plug (17).
(4)
Install the plug (17) on the reservoir (9) and tighten the plug.
(5)
Install a new O-ring (11) on the plug (12).
(6)
Install the plug (12) on the reservoir (9) and tighten the plug.
(7)
Install a new O-ring (7) with the union (6).
(8)
Install the union (6) with its O-ring on the reservoir (9) and tighten.
(9)
Install a new O-ring (5) on the check valve (4).
1EFF : ALL 1 30-45-45Page 406 1 1 May 01/05R 1 1 1CES 1
(10)
Install the check valve (4) on the union (6) and tighten the check valve.
(11)
Install a new O-ring (3) on the union (2).
(12)
Install the union (2) with its O-ring on the check valve (4) and tighten the union.
(13)
Remove the blanking plugs from the disconnected line ends.
(14)
Install the reservoir (9) and the clamps (8) and (10).Do not fully tighten the clamps at this time.
(15)
Connect and tighten the line (15) on the union (14).
(16)
Connect the elbow (1) to the union (2) and tighten the elbow.
Subtask 30-45-45-210-050
B. Visual Inspection
(1) Make sure that the reservoir (9) is correctly installed.
(2)
Make sure that there are no leaks.
Subtask 30-45-45-420-052
C. Tighten the clamps (8) and (10).
5. Close-up
________
Subtask 30-45-45-865-052
A. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s): R 1DB1, 1DB2.
Subtask 30-45-45-410-050
B. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Close the access door 811.
(3)
Remove the access platform(s).
R CHECK VALVE - RAIN REPELLENT (3DM,4DM,5DM) - REMOVAL/INSTALLATION
_________________________________________________________________
TASK 30-45-46-000-001
Removal of the Rain Repellent Check Valve (3DM,4DM)
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM ICE AND RAIN PROTECTION 防冰和排雨2(38)
