A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
121VU COM NAV/ACARS/MU 2RB L06
Subtask 22-70-00-862-061
B. De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
R **ON A/C 106-149, 151-199, 201-299, 301-399, 401-499,
TASK 22-70-00-610-006-A Download the FM Data
1. Reason for the Job
__________________
Download the FM Data with the Multipurpose Disk Drive Unit (MDDU).
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
PS4084544-103 1 FM BITE DOWNLOAD TOOL PS4087689-102 1 FM BITE DOWNLOAD TOOL
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power
3. Job Set-up
__________ Subtask 22-70-00-861-060
A. Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002). Subtask 22-70-00-860-078
B. Aircraft Maintenance Configuration
(1) Make sure that the aircraft is in the ground configuration.
Subtask 22-70-00-865-088
C. Make sure that this(these) circuit breaker(s) is(are) closed: -------------------------------------------------------------------------------
PANEL ------ DESIGNATION --------------------------------------------- IDENT. LOCATION----------------------------
49VU AUTO FLT/FMGC/1 10CA1 B02
49VU AUTO FLT/MCDU/1 11CA1 B01
49VU L/G/LGCIU/SYS1/NORM 1GA C09
121VU DATA/LOADER/SPLY 3TD J16
121VU DLS&/DLRB/SPLY 5TD J15
121VU AUTO FLT/FMGC/2 10CA2 M17
121VU AUTO FLT/MCDU/2 11CA2 N20
4. Procedure_________
**ON A/C 201-203,
Subtask 22-70-00-610-062
A. Downloading of the FM BITE Data
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1.
Open the circuit breakers 10CA1 and 10CA2.
2.
On the overhead panel, on the Data Loading Selector:
-set the ON/OFF switch to ON.
3. On the overhead panel, on the Data Loading Selector:
-push the PREV or NEXT key until you get the indication of the FMGC1 that you can download,
On the display of the Data LoadingSelector:
-DB/N: PUSH NEXT/PREV indication is shown.
On the multipurpose disk drive unit:
-the < < MDDU READY > > indication is shown.
On the display of the Data LoadingSelector:
-FMGC1NOT SELECTEDindication is shown,
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-push the SEL CTL key.
4.
Close the circuit breaker 10CA1.
5.
On the multipurpose disk drive unit:
-put the FM BITE DOWNLOAD TOOL (PS4084544-103) into the disk drive.
6. On the multipurpose disk drive unit:
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM AUTO FLIGHT 自動飛行2(70)
