4. Procedure
_________

 Subtask 11-00-00-915-055
 A. ESSO Labels Installation
 (1)
 Remove the protective backing.

 (2)
 Apply a coat of CLEANING AGENTS (Material No. 11-003) or CLEANING AGENTS (Material No. 11-016) to the adhesive film on the back of the label with clean brush.

 (3)
 As soon as the adhesive softens and becomes tacky, install the label and press down, specially around the edges.

 5. Close-up
________ Subtask 11-00-00-942-055
 A. Make sure that the work area is clean and clear of tool(s) and other items.
 EFF : ALL

11-00-00Page 215
May 01/05
R
 CES

 TASK 11-00-00-400-007
 Installation of the ESSO (Scotchcal Labels)

 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-002  USA MIL-PRF-680 DRY CLEANING SOLVENT (VARSOL/WHITE SPIRIT) (Ref. 20-31-00)
 Material No. 11-003  USA ASTM D 740 METHYL-ETHYL-KETONE (Ref. 20-31-00) Material No. 11-016 USA BOEING BAC 5000 BAC 5504 BAC 5750 CLEANING SOLVENT (Ref. 20-31-00)
 3. Job Set-up
__________ Subtask 11-00-00-110-055
 A. Cleaning
 (1) Clean the surface on which you will bond the label, using CLEANING AGENTS (Material No. 11-003) or CLEANING AGENTS (Material No. 11-016), then thoroughly dry.
 4. Procedure
_________ Subtask 11-00-00-915-056
 A. Label Installation
 (1)
 Remove the protective backing paper from the label.

 (2)
 Put the label in position and apply heavy pressure.

 (3)
 Clean with soapy water.

 (4)
 Remove the oil stains with CLEANING AGENTS (Material No. 11-002).

 EFF : ALL

11-00-00Page 216
May 01/05
R
 CES  5. Close-up

________ Subtask 11-00-00-942-056
 A. Make sure that the work area is clean and clear of tool(s) and other items.
 EFF : ALL

11-00-00Page 217
May 01/05
R
 CES  TASK 11-00-00-400-008

 Installation of the ESSO (Scotchcal Labels) in the Presence of Skydrol
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific brush No specific emery cloth, Grade 350 No specific pad
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 08-017 GB S27-8006
 BONDING METAL/METAL (Ref. 20-31-00) Material No. 11-003 USA ASTM D 740
 METHYL-ETHYL-KETONE (Ref. 20-31-00) Material No. 11-016 USA BOEING BAC 5000 BAC 5504 BAC 5750
 CLEANING SOLVENT (Ref. 20-31-00)
 3. Job Set-up
__________
 Subtask 11-00-00-110-056
 A. Cleaning
 (1)
 Roughen the surface on which you will bond the label, using emery cloth, Grade 350 and then clean with CLEANING AGENTS (Material No. 11-003) or CLEANING AGENTS (Material No. 11-016), then thoroughly dry.

 (2)
 Remove the protective backing paper, then remove the adhesive compound with a pad soaked in CLEANING AGENTS (Material No. 11-003) or CLEANING AGENTS (Material No. 11-016).

 EFF : ALL

11-00-00Page 218
May 01/05
R
 CES  4. Procedure

_________ Subtask 11-00-00-915-057
 A. Label Installation
 (1)
 Using a brush, apply a coat of BONDING AND ADHESIVE COMPOUNDS (Material No. 08-017).

 (2)
 Affix the label and apply light pressure to the label for about 30 seconds.

 5. Close-up
________ Subtask 11-00-00-942-057
 A. Make sure that the work area is clean and clear of tool(s) and other items.
 EFF : ALL

11-00-00Page 219
May 01/05
R
 CES

 TASK 11-00-00-400-009

 Installation of the FOTOFOIL Labels
 1.
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM PLACARDS AND MARKINGS(17)