曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

starts) and here after selecting this LSK further aircraft
types that are stored in your “Types” subdirectory in the
Main CDU program folder are shown as selectable options.
Once selected, the new type will be shown on the Ident
page.
The diagram illustrates the data exchange between the CDU
program subfolders and the Glass Cockpit.
Project Magenta Revision: 12 March-08
76
RJ - Selecting displays
The Glass Cockpit also needs to know whether it is operating as a Captains Display or a Co-Pilots display.
This is selected under the user options in the ESC menu. Note that the Co-pilots display requires a special
second GC license. If you selected without registering it, the Glass Cockpit will run into communication
conflicts on the ND display modes amongst other things.
Project Magenta Revision: 12 March-08
77
Keyboard Commands – RJ
General Options
Ctrl-M or
Esc
Opens Options Menu Screen
Q Exits Program (Alt-Q shuts down the PC... without a prompt...watch out!)
F displays/hides frame rate and OpenGL acceleration type
W Toggles Title Bar display
Z or X Toggles Background Grey
Moving of Instruments and Pages
Cursor Keys Move displayed Instruments Left, Right, Up, Down
Ctrl-Cursor Keys Move displayed Instruments Left, Right, Up, Down
Alt-Cursor Keys Move Navigation Display Left, Right, Up, down (only on 2 Element display PFD,
ND)
Move Engine Display Left, Right, Up, Down (only in 3 Element Display PFD, ND and
Engine)
When on the Standby Gauge page (F10) you can position the single items by
pressing the Tab-Key to select which instrument to move, moving it with Alt-Cursor
or Ctrl-Alt keys afterwards.
You can also change the space between the ND and the PFD by pressing the Y
and U keys.
Alt-Shift-cursor
Keys
Move Engine Display Left, Right, Up, down (only on 2 Element display PFD, Engine
Display)
Y, U To change distance between PFD and ND (ND position)
+(NumPad Plus) Zoom In (Increase Size)
- (NumPad
Minus)
Zoom Out (Decrease Size)
BackSpace
Enable/Disable Bitmap frame around instruments (Ctrl-Backspase to select for
positioning)
Accessing Page Modes
F1 to F10
Access modes directly, F1 PFD, F2 ND, F3 Engine, F4 Captain PFD/ND, F5
PFD/ND/Engine F10 Standby Instruments
Project Magenta Revision: 12 March-08
78
N/PgDn
Switch to next Mode (PFD, ND, Engine, Captain PFD/ND, Copilot PFD/ND, Captain
PFD/ND/ENG, Copilot PFD/ND/ENG)
L/PgUp Switch to previous mode
BackSpace
Enable/Disable Bitmap frame around instruments (Ctrl-Backspase to select for
positioning)
Ctrl-I Switches off displays, pressing it a second time makes them light up again
Primary Flight Display
V/B Increase/Decrease Decision Height (DH) (Ctrl-Shift-V resets DH to default)
Insert Switches display from hPa to Inches and back
Delete Sets QNH to STD (29.92/1013)
Home/End Increases/decreases QNH
D Flight Director On/Off Shift-A = Flight Director bar toggle
ND Modes
Ctrl-5, 6, 7 Distinct OFF, VORL, ADFL (inop if MCP is active)
Ctrl-8, 9, 0 Distinct OFF, VORR, ADFR (inop if MCP is active)
I
Toggles Waypoint information (ETA and Distance) in the ND for flight plan points
(DATA)
G, H Decrease, Increase MAP range
1 VOR toggle On/Off in MAP Mode (Ctrl-1 Off only)
2 NDB toggle On/Off in MAP Mode (Ctrl-2 Off only)
3 WPT toggle On/Off in MAP Mode (Ctrl-3 Off only)
4 ARPT toggle On/Off in MAP Mode (Ctrl-4 Off only)
5, 6, 7, 8, 9,
0
MAP Range 7.5, 12.5, 25, 50, 100, 200 NM
Ctrl-C, Ctrl-Shift-
Z
Switches TCAS Mode
Ctrl-O Overview Page
O Weather Radar On/Off
Project Magenta Revision: 12 March-08
79
Ctrl-R Terrain Display On/Off
Ctrl-G Terrain Mode Display: Lines, Grid, Triangles
Ctrl-H Terrain Colour Display: Altitude, Green, Delta Altitude
Alt-G Terrain Map Size Small/Step2, Large/Step2, Small/Step1, Large/Step2
T Changes the bottom of the ND from Fuel to Controls and vice versa
Engine Page
Ctrl-C Toggles the display of the controls (Extra Information, Elevator/Aileron position etc.)
Ctrl-V Toggles MCP value indication left of Engine display (If MCP is present)
Tab Switches to the next Engine display page.
Ctrl-S Toggles "No Smoking" indication
Ctrl-B Toggles "Fasten Seatbelts" indication
Settings RJ.INI
There are various items you can customize both within the program and in the program's INI file, RJ.INI.
Please check the RJ INI itself for the latest entries, they are self-commenting.
Project Magenta Revision: 12 March-08
80
Project Magenta Revision: 12 March-08
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Project Magenta USER MANUAL Revision: 12 March-08(26)