曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

extended First Officer Glass Cockpit license it is possible to run a Remote CDU (RCDU). The RCDU provides
the First Officer with an independent display and input device (exactly like on the real a/c). It operates
independently of the Main CDU, but as the Main CDU still performs the actual FMC computations, the Main
CDU program must be running for the RCDU to function.
The RCDU is run on a separate client computer to the CDU. This is networked in the same fashion as the
rest of the PM software.
Project Magenta Revision: 12 March-08
30
The CDU software (and the RCDU) can be run as standalone CDU software solutions or in conjunction with
CDU hardware. The only difference to the two types of operation is that with hardware you will need to run
the CDU in full screen mode as you will no longer need to see the CDU Bitmap graphic. You can do this in
two ways, one by editing the CDU ini file and also through the user menu by pressing the MENU key twice
on the CDU graphic (as outlined in the “General” software section). You need to decide how you will use
the CDU. For this section we will assume a pure software usage when discussing the user options.
Step 1 CDU connected
Make sure MSFS is running and the CDU is connected to it. No FAIL or ERROR messages are appearing.
You have performed the actions in the NETWORK and GLASS COCKPIT sections of the manual.
Step 2 Setting Aircraft Type
When the CDU starts you will be presented with an IDENT page. This gives information about the current
status. We will assume that MSFS is running and the Glass Cockpit is also running.
• Set the aircraft type by pressing the LSK next to the type of aircraft listed (top right of the CDU
screen).
• From the list shown, select the type of aircraft you will be using (this should match the type you
have already selected in MSFS)
• Once you have selected the aircraft type the you do not need to do this again, unless you wish to
fly a different type with different performance data
This in itself will set the specific performance data in the type txt reference file that is located in the
CDU\Types folder of the Main CDU folder.
Project Magenta Revision: 12 March-08
31
Step 3 Keyboard layout
Different aircraft have different Keyboard layouts. Despite having changed the aircraft type txt, you may
also want to match a specific key layout for that aircrafts CDU keyboard. This can be changed in two ways.
There is an automatic function and a manual function. The automatic function will load a typical keyboard
layout for the aircraft type you have selected in the IDENT page every time you select a new one. The
manual selection will mean that no change will take place until you manually edit the cdu.ini file. For the
automatic function to work, you must first set it to auto and then re-select the aircraft type from the IDENT
page.
Example:
Press the MENU key twice. This will bring up a special user menu of extra settings. These items are not
normally seen on the aircraft by pilots. They would be used in a software maintenance situation and in a
similar way we use them to set specific user options for the CDU software. Press the LSK key next to
DISPLAY. Then select the LSK key next to the option KEY CONFIG. This will then switch to AUTO from
MANUAL or vice versa.
Navigate back to the IDENT page (INIT REF -> INDEX). Now re-select your
aircraft type from the Ident LSK option. The CDU will be refreshed and the
new keyboard layout will be shown. In this example the 747-400 CDU key
layout has been generated. This is more than just a graphical adjustment.
Some keys are different and will offer different navigation functions. If you
are likely to switch between aircraft types often, you may wish to leave the
above display option in AUTO. If you are using hardware with your CDU,
and your hardware is unlikely to change then you should set the function
to MANUAL again once you have the keyboard layout that you require for
your specific layout. This will reduce the chances of a hardware / software
keyboard miss-match in the future operation of the CDU.
Project Magenta Revision: 12 March-08
32
Step 3 IRS Position
The CDU needs to know where it is in the world
just like the CDU on the actual aircraft. If you do
not set the CDU position then parts of the Glass
Cockpit Displays will be blanked out from view
with Amber warning flags ATT and MAP. This is a
safety feature of the GC if a position uncertainty
occurs whilst the aircraft is on the ground.
To set the CDU position, press the LSK key that is
next to the INDEX option (bottom right). Then select the LSK opposite the POS option. Now the position
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Project Magenta USER MANUAL Revision: 12 March-08(11)