曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

by the PUSH X-SIDE switch on the DCP.
FLIGHT INSTRUMENTS
Description
Vol. 2 11−10−30
REV 66, Feb 01/07
CL−604 Operating Manual
PSP 604−6
CONTROLS AND INDICATORS (CONT'D)
Compass Rose
The compass rose contains index markings every five degrees, and alphabetic or numeric
markings displayed at 30-degree intervals. Additional fixed index marks display outside the
compass rose perimeter at 45-degree intervals with respect to the lubber line.
Airplane Symbol
A stationary airplane symbol displays in the center of the compass rose. This symbol points
directly toward the lubber line.
Lubber Line
The lubber line is a fixed symbol at the top of the compass rose. The current airplane heading
is the compass reading directly under the lubber line.
Selected Heading Bug
A heading bug symbol marks a selected heading reference. Turn the HDG knob on the FCP to
move the heading bug around the compass rose. Momentarily pushing the center switch
(PUSH SYNC) of the knob resets the heading bug to the current airplane heading.
Selected Heading Display
This display numerically shows the position of the selected heading bug. This display appears
when the HDG knob is turned, and disappears three seconds after rotation stops.
Drift Angle Pointer
This pointer is a small green circle that shows the airplane drift angle.
Bearing Pointers
There are two bearing pointers that may be selected for display (BRG buttons on DCP). One
pointer is a single bar and the other pointer is a dual bar. Each pointer shows the bearing to a
selected navaid station or the next FMS waypoint. The appropriate source for the bearing
pointer is displayed below it.
Course Pointers
The on-side course pointer is a solid-line pointer. This pointer shows the on-side NAV course.
This value is numerically repeated in the on-side course display. Push the DCP X-SIDE button
to display the cross-side cyan course pointer.
The cross-side course pointer is a dual dashed-line cyan pointer. This pointer shows the
cross-side NAV course. This value is numerically repeated in the cross-side course display.
To/From Symbol
A triangle symbol shows “to” or “from” direction. This symbol turns as a part of the on-side
course pointer, and points toward the tuned station or next waypoint.
FLIGHT INSTRUMENTS
Description
Vol. 2 11−10−31
REV 66, Feb 01/07
CL−604 Operating Manual
PSP 604−6
CONTROLS AND INDICATORS (CONT'D)
Lateral Deviation Bars
The lateral deviation bars are the center portions of the course pointers. Each bar moves left or
right from the pointer to show lateral deviation from the NAV course.
Lateral Deviation Scale
The lateral deviation scale consists of four dots that display perpendicular to the on-side
course lateral deviation bar. Two dots display on either side of the airplane symbol.
Vertical Deviation Display
The ILS glideslope or the FMS VNAV vertical deviation display appears when all appropriate
conditions are met. The on-side DCP selects LOC/FMS as the active NAV source. If, or as
deviation data becomes invalid, this display is replaced with a red GS icon. When FMS VNAV
deviation data is invalid, the deviation scale and pointer are removed. When making a back
course approach, the scale displays without a pointer or flag annunciation.
ILS/GS vertical deviation is shown by the position of a green diamond-shaped pointer relative
to the deviation scale; whereas a white star pointer shows the FMS VNAV vertical deviation.
The scale consists of two dots above and two dots below center. If GS deviation becomes
excessive, the pointer and scale flash yellow.
MFD HSI Format
Figure 11−10−20
NAV Sector Format
This display shows navigation information on an enlarged section of the compass rose. The
following sections are part of the NAV sector format.
On-side Course Display
The (left) display window shows on-side course information in green, yellow or white
(VOR/LOC on-side green, VOR/LOC cross-side yellow, FMS on-side white or FMS cross-side
yellow). This information is the active NAV course data displayed on the on-side PFD.
FLIGHT INSTRUMENTS
Description
Vol. 2 11−10−32
REV 66, Feb 01/07
CL−604 Operating Manual
PSP 604−6
CONTROLS AND INDICATORS (CONT'D)
Cross-side Course Display
The (right) display window shows cross-side course information in cyan. This information is the
active NAV course data displayed on the cross-side PFD.
NOTE
Cross-side course information is selected or deselected for display
by the PUSH X-SIDE switch on the DCP.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：龐巴迪挑戰者604操作手冊 Operating Manual 4(24)