曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Lexinet - Airbus Reference Language
Approved Terms
Surface Design-Engineering Computer-Aided Design (CAD) entity that defines a shape. AP2619
Survey Organization/Management A- To look over or examine with reference to conditions, situation or value.
B- Examine and ascertain the state of: Appraise, Estimate, Evaluate.
WD
Syllabus Training Training module supported by any flight training device from level 4 to 7 (as
defined by the AC 120-45A) or by the aircraft.
System Common Terms/Aircraft
Constituent Items
A combination of inter-related items arranged to perform a specific function
(see ABD0200).
WATOG
System Installation Design
Principles
Procedural Documentation Airbus document that defines, by Air Transport Association of America (ATA)
chapter, technical solutions for installing systems in order to meet design
requirements applicable to a specific Aircraft Type.
System Provision Industrialization/Provisions System Provision shall mean that, for example, supports, brackets, tubes and
fittings, electrical wiring and hydraulic lines, shall be installed where
accessibility on the completed aircraft would be limited. Adequate space shall
be allocated so that system installation can be completed easily.
System Trainer Training No longer to be used. See Part Task Trainer.
Systems Configuration
Guide
Aircraft Configuration This is a handbook detailing all Entity per Aircraft Change (EPAC) items, for
systems, and their respective TDUs which may be offered as options to
customers and prospective customers.
Tabulation and Interpolation
Program
Aircraft Operation/Performance
Engineering
This program replaces the conventional diagrams usually given in the
performance section of the Flight Manual. It is certificated for A320 only. It
allows determination of a single or multiple point by fast interpolation within the
relevant curve network of the data base considered. TAB program works for the
Low Speed (LSP) data base which is submitted for Airworthiness Authority
approval.
A320
Takeoff Aircraft Operation/Operations
Engineering
Term commonly used for Takeoff Path.
Takeoff and Landing Chart
Computation Program
Aircraft Operation/Performance
Engineering
The TLC permits the computation of regulatory takeoff and landing performance
as well as non-certified takeoff performance (wet or contaminated runways),
taking into account runway data and atmospheric conditions. The TLC works
from the Low Speed (LSP) data base.
A310/A300-600/A320
Approved Terms © Airbus SAS 2007. All rights reserved. Confidential and proprietary document.
69/79
19 Mar 07
Term Domain Definition Source
Lexinet - Airbus Reference Language
Approved Terms
Takeoff Charts Aircraft Operation/Operations
Engineering
TCs provide takeoff performance data for a specific runway. They are computed
using Performance Engineers’ Programs (PEPs). TCs are sometimes also
called Runway Takeoff and Landing Weight (RTOLW) charts when landing data
are included or, RTOW charts when only takeoff data are included.
Takeoff Charts Computation
Program
Aircraft Operation/Performance
Engineering
The TCP allows computation of the aircraft maximum takeoff weight, taking into
account the aircraft performance, the runway characteristics and the
atmospheric conditions.
A300B
Takeoff Path Aircraft Operation/Operations
Engineering
The path of an aircraft which extends from a standing point on the runway to the
point at which the transition from the takeoff to the en route configuration is
completed and the final takeoff speed is reached.
Task Organization/Airbus/Optimise
Skills
A piece of work to be done.
Task - AMM Customer Services/Contractual
Technical Publications
A - (Pre-revision 28 of ATA 100 Specification). Name given to each operation
contained in a Maintenance Procedure. Tasks are subdivisions of Topics.
B - (Post revision 28 of ATA 100 Specification). Name given to each operation
contained in a Maintenance Procedure. Topics are subdivisions of Tasks.
Task Force Organization/Airbus No longer to be used.
A group of people, who may be from different sources and disciplines,
functioning under a Chairman for the purpose of accomplishing a specific
predetermined objective.
Taxiway Aircraft Operation/Flight
Operations
Defined area, on a land airport prepared for taxiing aircraft to and from the
runway.
Technical Definition Common Terms/Basic Terms Document containing the Definition Data of an aircraft or a product. It records
the identified requirements (functions, characteristics, performances).
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：空客縮略語Airbus Reference Language Abbreviations (Approved(80)