曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

such time as all such persons have disembarked, in which:
a) A person is fatally or seriously injured as a result of
a. Being in the aircraft
b. Direct contact with any part of the aircraft, including parts which have
become detached from the aircraft
c. Direct exposure to jet blast
Except when the injuries are from natural causes, self-inflicted or inflicted by
other persons, or when the injuries are to stowaways hiding outside the areas
normally available to the passengers and crew,
or:
b) The aircraft receives substantial damage or structural failure, which
adversely affects the structural strength, performance or flight characteristics of
the aircraft, and would normally require major repair or replacement of the
affected component (before next flight).
Except for engine failure or damage when the damage is limited to the engine,
AP2509
its cowling or accessories; or for damage limited to propellers, wing tips,
antenna, tires, brakes, fairing, small dents or puncture holes in the aircraft skin.
or:
c) The aircraft is missing or is completely inaccessible.
Note: The above definition of an accident does not cover all possible events.
Airbus Expanded Accident Definition:
Airbus has adopted the ICAO definition, but has expanded it beyond aircraft
boarding and disembarkation to encompass ground accidents resulting in death
or serious injury from aircraft-related causes. In other words, the Airbus
definition covers aircraft-related injury or death of passengers, flight and cabin
crews, and ground, dispatch, airport, maintenance and cleaning personnel that
occur outside of "block times", as well as during any phase of flight operations."
Approved Terms © Airbus SAS 2007. All rights reserved. Confidential and proprietary document.
2/79
19 Mar 07
Term Domain Definition Source
Lexinet - Airbus Reference Language
Approved Terms
Accountable Organization/Management
Implementation
A in RASCI.
An Accountable person has the ultimate ownership of a deliverable. The
accountable person takes the final decision on the deliverable and carries the
risk in case of non-conformances.
A10 COM section 6.1
Achieve Organization/Management
Implementation
To bring to a successful conclusion. WD
Activity Organization/Airbus/Optimise
Skills
A collection of tasks grouped together for a particular purpose.
Actual Time of Arrival Aircraft Operation/Flight
Operations
Under Instrument Flight Rules (IFR) the ATA is the actual time an aircraft is
above a designated arrival point from where the pilot would begin an instrument
approach. Under Visual Flight Rules (VFR), or if the airport does not have
instrument landing facilities, the ATA is the actual time the aircraft arrives over
the airport.
Actual Time of Departure Aircraft Operation/Flight
Operations
The ATD is the actual time an aircraft is above a designated departure point, or
if there is no air traffic control, the actual time the aircraft leaves the airport.
Adaptability Design-Engineering The extent to which an item is able to become suitable for a new use or
situation. (Not approved for use in relation to "interchangeability").
Adaptation Solution Aircraft Definition Evolution Intermediate Technical Solution to be embodied on some aircraft before the
Series Technical Solution can be applied.
based on ACMR
Additional Training Training Any training or training aids provided or to be provided to an Airbus Customer
which is not covered by the terms of the Purchase Agreement. Additional
Training or training aids are subject to a specific agreement or commercial
relationship between the Customer and Airbus Customer Training.
Adhere Organization/Management
Implementation
To hold, follow or maintain loyalty steadily and consistently (as to a person,
group, principle or way).
WD
Adhesive Film Common Terms Wide tape, printed by the Silk Screen or Electrostatic Methods, applied on the
aircraft surface. An adhesive layer coats the inner surface. It can be in large
format for logos, or in the form of colored strips as decided by the Customer.
AI/PE-T
Advance Copy Customer Services/Contractual
Technical Publications
Documents/Data issued against Technical Publications to provide advance
information until inclusion in the normal or Temporary revisions. Valid only
where related to aircraft before delivery.
Approved Terms © Airbus SAS 2007. All rights reserved. Confidential and proprietary document.
3/79
19 Mar 07
Term Domain Definition Source
Lexinet - Airbus Reference Language
Approved Terms
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：空客縮略語Airbus Reference Language Abbreviations (Approved(46)