.  Assembly of Inner Seals to Nozzle Inner Band

.  Final Inspection

.  Preliminary Inspection

.  Installation of Front Shaft on Fixture

.  Installation of Front Blade Retainer

.  Installation of Front Rotating Air Seal

.  Installation of Seal/Disk Assembly

.  Installation of HPT Rear Shaft

.  Installation of HPT Blades and Rear Blade Retainer

.  Initial Balance

.  Blade Tip Grind

.  Final Balance

.  Installation of Seal Strips and Rear Blade Retainer

.  Final Inspection

Assembly

.  Preliminary Inspection

.  Preparation of HPT Shroud Support Assembly for assembly

.  Installation of Shrouds

.  Installation of Outer Seal (Aft Side)

.  Installation of Retaining Clips

.  Installation of Shroud Aft Seals

.  Installation of Inner Shroud Seals

.  Assembly of Stage 1 LPT Nozzle Assembly

.  Engine Assembly Measurement

.  Installation of Retaining Ring

.  Preparation of Shroud Grind

.  Final Inspection

.  Preliminary Inspection

.  Assembly of LPT Stage 1 Disk

.
Assembly of LPT Stage 2 Disk

.
Assembly of LPT Stage 3 Disk

.  Assembly of LPT Stage 4 Disk

.  Assembly of LPT Shroud Support and LPT Case

.  Preparation for assembly of LPT Rotor/Stator on Assembly/Disassembly Fixture

.  Installation of LPT Stage 1 Disk Assembly

.  Installation of LPT Stage 2 Nozzle

.  Installation of LPT Stage 2 Disk Assembly

.  Assembly of LPT Stage 3 Nozzle

.  Installation of LPT Stage 3 Disk Assembly

.  Assembly of LPT Stage 4 Nozzle

.  Installation of LPT Stage 4 Disk Assembly

.  Installation of T4.95 Plugs

.  Installation of LPT Rotor/Stator Assembly on Storage Stand

.  Balancing of LPT Rotor

.  Dynamic Balance of LPT Rotor/Stator Assembly

.  Installation of Balance Weights

.  Preliminary Inspection

.  Installation of No.4 Roller Bearing

.  Installation of Forward Rotating Oil Seal on Stub Shaft

.  Installation of Forward Rotating Air Seal

.  Installation of Rear Rotating Air Seal and Rear Rotating Air/Oil Seal

.  Serviceability Check of Center Vent Tube Support

.  Installation of Center Vent Tube Supports

.  Installation of Center Vent Tube

.  Installation of LPT Shaft Center Vent Tube Rear Extension Duct

.  Balancing of LPT Shaft Assembly

.  Installation of of No.5 Roller Bearing

.  Final Inspection

.  Preliminary Inspection
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：CFM 56-3 Engine Disassembly and Assembly Capability(12)