(Continued)
Material Source Usage
Grease MIL-G-434 On threads of fittings in pneumatic tubing.
(opt)
BMS 3-24 On threads of titanium bolts securing PT2/TT2 access panel.
Hydraulic Tubing Lube MCS 352 On threads of fittings in hydraulic tubing.
Lacquer thinner Methyl Ethyl General purpose cleaner
Ketone
Lockwire MS20995N32 General purpose applications AVM Instl
MS20995NC20
Lubricant Silicone IDG Instl
Grease
Dow Corning
#4 (V71984)
MIL-L-7808 General purpose O-ring Lube
BMS 3-8 On threads of clamps
MIL-L-23699 O-rings for starter & valve
MIL-L-7808
(opt)
Safety Cable AS3510-02( )K General purpose applications. Refer to usage instructions in
(V70958) applicable installation figures.
NOTE: ( ) refers to length in increments of 3 inches.
Sealant BMS 5-79 PT2/TT2 Probe Sealant Pro Seal 860 Class B
(V83527) BMS 5-63 Grounding Wire Sealant Solvent Federal Flush IDGS Cooling System Specification P-D-680 Type I
Tape Scotch 70 Under wire bundle clamps (Fan Case) (V76381) P421, P440 Under wire bundle clamps (Core Case)
(Opt) (V99742) Teflon tape, Acrylic back Scotch 63, or Tubing clamps 65 (V26066) Wet Primer BMS 10-11 Washer & Clamp Instl Type I
8. Standard Practices
A. Before starting engine buildup, read the applicable sections of this manual to become familiar with items to be installed and procedures to be followed. Also, review the Standard Overhaul Practices Manual (D6-51702) for additional information on standard practices, specifically the following:
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 動力裝置安裝手冊 Powerplant Buildup Manual(10)
