曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

III.  INSPECTION OPTIONS - DTR CHECK FORM F-16C Forward of BS 983 around door cutout (within "Area A" and “Area E” as shown on the illustration pages).
(1) Outer Chord (Internal) From Direction 1, using visual inspection methods and at specified locations, using HFEC
(Ref. NDT Manual D6-37239, Part 6, 53-10-57). 1.25 elapsed hour and 1.25 manhours are required to accomplish this inspection.
Access: Open door 4301.  Remove side panels, insulation and lower sill corner scuff plates.
Zone(s): 108, 220.
(2) Outer Chord
(Internal) From Direction 2, at specified locations, using LFEC (Ref. NDT Manual D6-37239, Part 6, 53-10-56). 0.75 elapsed hour and 0.75 manhours are required to accomplish this inspection.
Access: Open door 4301.  Remove scuff plates.
Zone(s): 100, 200.
IV.  INSPECTION OPTIONS - DTR CHECK FORM F-16D Aft of BS 983 around door cutout (within "Area D” shown on the first illustration page).
(1) Bear Strap
(External) From Direction 1, at specified locations, using LFEC (Ref. NDT Manual D6-37239, Part 6, 53-10-56). 0.75 elapsed hour and 0.75 manhours are required to accomplish this inspection.
Access: None required.
Zone(s): 100, 200.
8.2   FUSELAGE SSI INFORMATION D6-82669 Original

V.  INSPECTION OPTIONS - DTR CHECK FORM F-16E Aft of BS 983 around door cutout (within "Area G” and “Area H” as shown on the second illustration page).
(1)
Inner Chord
(Internal) From Direction 1, at specified locations, using visual inspection methods.

Access: Open door 4301.  Remove side panels.
Zone(s): 108, 220.

(2)
Inner Chord (Internal) From Direction 1, at specified locations, using HFEC (Ref. NDT Manual D6-37239, Part 6, 53-10-57). 1.25 elapsed hour and 1.25 manhours are required to accomplish this inspection.

Access: Open door 4301.  Remove side panels.
Zone(s): 108, 220.

VI.  INSPECTION OPTIONS - DTR CHECK FORM F-16F Aft of BS 983 around door cutout (within "Area G” and “Area H” as shown on the second illustration page).
(1) Outer Chord
(Internal) From Direction 1, using visual inspection methods.

Access: Open door 4301.  Remove side panels and insulation.
Zone(s): 108, 220.

Original  D6-82669 8.2  FUSELAGE SSI INFORMATION

8.2  FUSELAGE SSI INFORMATION D6-82669 Original

Original D6-82669 8.2  FUSELAGE SSI INFORMATION

8.2  FUSELAGE SSI INFORMATION D6-82669 Original

Original D6-82669 8.2  FUSELAGE SSI INFORMATION

8.2  FUSELAGE SSI INFORMATION D6-82669 Original

MODEL-SERIES

ITEM: F-16F
DTR CHECK FORM
737-300/-400/-500

Cutout, Aft Galley Door

OPERATOR(S)

NO. OF ELIGIBLE A/C
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300/400/500 補充結構檢查文件 SUPPLEMENTAL STRUCTURAL INSPECTION DOCUMENT 1(53)