8.2  FUSELAGE SSI INFORMATION D6-82669 Original

MODEL-SERIES

ITEM:

F-14B

DTR CHECK FORM

CUTOUT, FORWARD ENTRY

TITLE:
(WITH AIRSTAIRS)
AREA A, AREA B, AND AREA C

LOCATION:
20
10
5

2
DTR
1

.5

.2
.1

.03.05 .1 .2 .5 1 2 5 10 20 50 100
N (THOUSANDS OF FLIGHTS)

NOTES:

737-300/-400/-500

OPERATOR(S)

NO. OF ELIGIBLE A/C

EXAMPLE

STRUCTURE AND INSPECTION DETAILS
LEAD CRACK: FRAME CHORD

2

1 GENERAL VISUAL INSPECTION IN AREA B; DETAILED INSPECTION IN AREA C; HFEC

OR LFEC INSPECTION (AS SPECIFIED IN NDT DOCUMENT) OF OUTER CHORDS IN AREA A

WHERE FRAME WEB IS NOT VISIBLE; HFEC INSPECTION OF INNER CHORDS IN AREA C

AT FRAME-TO-SILL INTERSECTIONS.

2 INNER CHORD NOT SHOWN

3  WITH AIRSTAIRS DOOR 
STRUCTURE DETAIL  TASK REFERENCE  INSPECTION PROGRAM DETAILS DIREC. CHECK LEVEL METHOD %PHASE Ro  FREQUENCY F-FLIGHTS  N = 100F/Ro 
FRAMES, SILLS, BEAR STRAP AND SKIN  3  4C 1  100  12000  12000

DAMAGE
DETECTION
PERIOD

DTR

N FLIGHTS

o
42400 10.2

F14B_PDF
FUEL LEAK DTR N/A

ENGR. C. KATYAL 2/18/99 REVISED

TOTAL DTR 10.2

CHECK R. JOCHUM2/18/99
APPR.

REQUIRED DTR

APPR.

Original D6-82669 8.2  FUSELAGE SSI INFORMATION THIS PAGE INTENTIONALLY LEFT BLANK

8.2  FUSELAGE SSI INFORMATION D6-82669 BLANK

N96967
F-15A - FORWARD GALLEY DOOR CUTOUT
Original D6-82669 8.2  FUSELAGE SSI INFORMATION

N96969
F-15B - FORWARD GALLEY DOOR CUTOUT (Continued)
8.2  FUSELAGE SSI INFORMATION D6-82669 Original

F-15  INSPECTION INSTRUCTIONS  REFERENCES  ACCESS MANHOURS 
MPD  CPCP  OTHERS  INSP  MHRS  ELPSD 
TITLE:  FORWARD GALLEY DOOR CUTOUT  S53-22-A  C53-100-01 C53-107-01  I.(2) II.(1)  0.5 10  0.5 5 

I.  INSPECTION OPTIONS - DTR CHECK FORM F-15A Around door cutout (within "Area A” and “Area C" as shown on the illustration pages).
(1)
Skin and Aft Reinforcement (Bear) Strap
(External) From Direction 1, using visual inspection methods.

Access: Open door 4701.
Zone(s): 100, 200, 107, 205.

(2)
Reinforcement (Bear) Strap and Skin

(Internal) From Direction 2, at specified locations, using LFEC (Ref. NDT Manual D6-37239,Part 6, 53-10-69) and at specified locations, using HFEC (Ref. NDT Manual D6-37239,Part 6, 53-10-08).
1.0 elapsed hour and 2.0 manhours are required to perform these NDT inspections.
Access: Open door 4701.  Remove lower sill corner scuff plates.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300/400/500 補充結構檢查文件 SUPPLEMENTAL STRUCTURAL INSPECTION DOCUMENT 1(51)