曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

PW Page 86 D633W113-BEJ May 05/02
S
FAULT DESCRIPTION_________________ FAULT CODE
 Start (engine):. Hung start.
 -left engine .................................... 801 618 61

 -right engine ................................... 801 618 62

. N1 rotation zero during start at or above 40%
 N2.

 -left engine .................................... 801 615 61

 -
right engine ................................... 801 615 62. N2 rotation zero during start.

 -left engine .................................... 801 616 61

 -
right engine ................................... 801 616 62. Slow acceleration to idle.

 -left engine .................................... 801 617 61

 -
right engine ................................... 801 617 62. Start fails during manual start.

 -left engine .................................... 801 811 61

 -
right engine ................................... 801 811 62. Start fails with fuel flow OK.

 -left engine .................................... 801 612 61

 -
right engine ................................... 801 612 62. Start fails with fuel flow zero or low.

 -left engine .................................... 801 611 61

 -
right engine ................................... 801 611 62. Start fails with ignition system 1 or 2.

 -left engine .................................... 801 613 61

 -right engine ................................... 801 613 62

. START/IGNITION L switch moves to the NORM
 position with N2 < 41%.

 -left engine .................................... 801 621 61

 -right engine ................................... 801 621 62

. START/IGNITION L switch stays in the START
 position with N2 > 46%.

 -left engine .................................... 801 622 61

 -right engine ................................... 801 622 62

 Start (engine, hot or impending hot), more than 10 seconds to light:
 -left engine .................................... 801 614 61

 -right engine ................................... 801 614 62

OBSERVED FAULTS
PW Page 87 D633W113-BEJ May 05/02
S
FAULT DESCRIPTION_________________  FAULT CODE__________
 Start (engine, impending hot), engine shut down
 before overtemp:

 -left engine .................................... 710 621 61

 -right engine ................................... 710 621 62

 START/IGNITION L switch:. Moves to the NORM position with N2 < 41%.
 -left engine .................................... 801 621 61

 -right engine ................................... 801 621 62. Stays in the START position with N2 > 46%.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Fault Reporting Manual 故障報告手冊(70)