- 196 -
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL
PREVIOUS
GRAPHIC
A22-11-00-136.fm
DFCS BITE PAGES - RIGGING - STABILIZER 2
January 2005
22-11
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved
A22-11-00-109.fm
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL
DFCS -STABILIZER B DIMENSION
General
When you need to accurately measure the B dimension of the stabilizer, use the trammel bar or a steel measurement tape. Measure the distance between the center of the upper gimbal pin and the center of the lower gimbal pin.
January 2005
22-11
- 198 -
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL
A22-11-00-109.fm
B DIMENSION 1 TRAMMEL BAR
THE B DIMENSION IS MEASURED BETWEEN THE
CENTER OF THE UPPER AND LOWER GIMBAL PINS
DFCS -STABILIZER B DIMENSION
January 2005
22-11
- 199 -
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved
A22-11-00-129.fm
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL
DFCS BITE PAGES - MCP TESTS
General
The MCP tests lets you do several tests of the mode control panel. In the tests you do a check of the function of the switches and the displays. You also do a test of all of the mode selector switches.
To do these tests, push LSK 3L on the EXTENDED MAINTENANCE page. The next page is the SELECT CHANNEL FOR TEST page. After you select the channel, you will see the MCP TEST AUTOTEST INITIALIZATION page.
MCP TEST AUTOTEST INITIALIZATION Page
Like all the other initialization pages, this page gives instructions to setup the autotests. The test sequence is the same as when you select CURRENT STATUS and AUTOPILOT tests. The pages look very similar except the title has MCP COMPLETE TEST in it instead of CURRENT STATUS and AUTOPILOT.
January 2005
22-11
- 200 -
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL
THE TESTS FOLLOW THE SAME SEQUENCE AS THE CURRENT STATUS AUTOTESTS AND AUTOPILOT INTERACTIVE TESTS.
A22-11-00-129.fm
DFCS BITE PAGES - MCP TESTS
January 2005
22-11
- 201 -
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL
A22-11-00-130.fm
DFCS BITE PAGES - SENSOR VALUES - ANALOG SIGNALS
General -Units that the analog data is in
-Sensor value for A and B system. When you select the SENSOR VALUES prompt on the EXTENDED MAINTENANCE page, you can then see one of these signals on the The LSK 6R will take you back to the SENSOR VALUES page. SENSOR VALUES page:
-Analog signals
-Digital signals
-Option/program pins
-Discrete outputs
-Discrete inputs.
This lets you see the values for these signals without the need for extra test equipment.
To select analog signals, push LSK 1L. This shows the ANALOG SIGNALS LIST page.
ANALOG SIGNALS LIST Page
This pages lists some of the analog sensors that you can measure. To see all of the analog sensors, push the NEXT PAGE and PREV PAGE function keys on the MCDU.
To select an analog sensor, push LSK next to the sensor name. This shows the ANALOG SIGNAL page.
ANALOG SENSOR Page
This page lists these data:
-Analog sensor
January 2005
22-11
- 202 -
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL
A22-11-00-130.fm
DFCS BITE PAGES - SENSOR VALUES - ANALOG SIGNALS
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-700 AVIONCS BITE HANDBOOK 航電自測設備手冊 2(6)
