曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Line 2L displays the first line of the fault description.
Line 3L displays the second line of the fault description. This line is blank when the fault description is only one line.
Line 4L displays the time and date at which the fault was detected, and also in Line 4R, the time since power-on (TSPOC) in minutes, since the fault occurred.
Line 5L displays the OOOI state during which the fault was detected, and in Line 5R, the number of times (Count) the fault has occurred in the flight leg being viewed,
23-27

SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved

A23-27-00-024.fm
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL

ACARS - BITE - FAULT LOG
NOTE:  To return to the CURRENT LEG page, select <RETURN (LSK 6L).
PREV LEG Display
The PREV LEG display supplies access to the fault history of the CMU for a particular leg of flight. This display is only accessible when previous flight legs with faults exist. Use the LSK’s to access the specific PREV LEG.
The format for the fault information will be as previous described for the CURRENT LEG page. You can also access the FAULT DATA page for a specific fault on that flight by selecting the individual fault using the LSK keys. The FAULT DATA page format will be as previously described.
January 2005
23-27

- 230 -
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL

.
A23-27-00-024.fm

 

LSK 3L
LSK 1L

LSK 6L

ACARS - BITE - FAULT LOG

January 2005
23-27
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL

ACARS - BITE - APM DATA
APM Data Display
The APM DATA display will show the information currently contained in the APM. When the APM has a fault and the working copy of the APM data is not valid, the APM DATA display also supplies a means for information to be entered to allow minimal data link operation. This display is only accessible if the HGI table is valid. To access APM DATA> select LSK 1R.
Line 1L and 1R displays the tail number (aircraft registration), and the ICAO aircraft type.
Line 2L is only displayed when the CMU copy of the APM data is valid, but the APM copy of the data is not valid. Selection of the prompt is an indication by the crew that the tail number and ICAO aircraft type are correct for the aircraft, and it is acceptable to use the CMU copy of the APM data.
Line 3L is only displayed when the APM hardware is valid, the working copy of the APM data is not valid, and the Allow Programming of APM via the MCDU AMI attribute is enabled. A password is required to be entered in the MCDU scratchpad in order to access this page.
NOTE:  To return to the MAINTENANCE MENU select <RETURN (LSK 6L).
Program APM
The PROGRAM APM display supplies the ability to program the APM using the MCDU. To access this page, enter the current password in the scratchpad and select LSK 6R.
Line 1L allows entry of an number that corresponds to an APM parameter and causes Line 2 to be displayed and updated. There are 166 possible APM parameters. See the Aircraft Maintenance Manual for a listing.
Line 2L displays the APM parameter that corresponds to the entry made in Line 1. The current value of the APM parameter is initially displayed. Entry in Line 2 is allowed and the format of the entry is dependent upon the type of parameter displayed.
Line 3L selection results in the APM parameter entered in Line 2 being written to the APM. After selecting Line 3, the CMU is restarted to ensure that all CMU options controlled by the APM parameters are correctly initialized
NOTE:  To return to the MAINTENANCE MENU select <RETURN (LSK 6L).

A23-27-00-025.fm
January 2005
23-27
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-700 AVIONCS BITE HANDBOOK 航電自測設(shè)備手冊 2(14)