曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費(fèi)者

To control the boundary layer in thecentrifugal impeller， slots in the impeller blading at the point of separation are used. To realize the fullcapability of this system， these slots should be directional and converging in a cross-sectional area from the pressure to the suction sides as seen in Figure 6-24. The fluid diverted by these slots increases in velocity and attaches itself to the suction sides of the blades. This results in moving theseparation region closer to the tip of the impeller， thus reducing slip and losses encountered by the formation of large boundary-layer regions. The slots must be located at the point of flow separation from the blades. Experi-mental results indicate improvement in the pressureratio， efficiency， and surge characteristics of the impeller as seen in Figure 6-24.

　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：燃?xì)鉁u輪工程手冊 Gas Turbine Engineering Handbook 1(86)