*
Control the electronic checklist.
Use the cursor control device to clear, enable or disable any of the functions.
The MAIN MENU command at the top left causes the maintenance page DISPLAY SELECTION menu to show.
Erasable Latched Status Messages
This window shows status messages whose activation conditions are no longer true but are latched in AIMS nonvolatile memory (NVM). The messages show in the order in which they were latched in NVM. The window shows a maximum of three messages. When three messages or less show, the page number shows 1/1. When more than one page of messages exist, the PAGE command shows. The page number then shows the total number of pages. Use the PAGE command to get to the other pages of messages. The messages page in a circular way. When you return to the first page of messages from the last pages of messages, the messages update and the page number updates. The initial selection of this maintenance page always causes the first page of messages to show.
The ERASE command clears the message from NVM and removes the message from the display.
The ERASE function does not operate when the airplane is in the air.
SMT Message Functions
This window shows the SMT messages whose activation conditions are true. The most recent SMT message shows first. The window shows a maximum of three messages. Use the PAGE command when more than three messages exist. (PAGE operation identical to latched status message function).
31-61-00
Page 98.149 D633W101-BEJ Sep 05/2002
EFFECTIVITY BEJ ALL
PRIMARY DISPLAY SYSTEM -MAINTENANCE TASK MAINTENANCE PAGE
Checklist Function
Each selection of the ENABLE/DISABLE button causes the message to toggle between [ENABLE] and [DISABLE]. This selection enables or disables the electronic checklist function. The current checklist condition shows next to the STATUS prompt. The system stores the message in non-volatile memory so that the condition remains when you put power back on the airplane.
The initial software load in the graphics generators cause the function to be ENABLED.
The toggle does not operate when the airplane is in the air.
EFFECTIVITY BEJ ALL 31-61-00
Page 98.150
D633W101-BEJ Sep 05/2002
PRIMARY DISPLAY SYSTEM -MAINTENANCE TASK MAINTENANCE PAGE
EFFECTIVITY BEJ ALL 31-61-00
Page 98.151
D633W101-BEJ Sep 05/2002
PRIMARY DISPLAY SYSTEM -LANDING GEAR ACTUATION MAINTENANCE PAGE
General
The landing gear actuation maintenance page is available in these three display modes:
*
Real time
*
Manual event
*
Auto event.
Title
The title shows the display mode. The title shows as:
*
LANDING GEAR ACTN/INDN for the real time mode
*
LANDING GEAR ACTN/INDN MAN for the manual event mode
*
LANDING GEAR ACTN/INDN AUTO for the auto event mode.
Auto Event Message
In the real time mode, the auto event message shows for the most recent auto event in memory. If there are no auto events in memory, the message field is blank.
In the auto event mode, the message for the incident shows.
There is no message in the manual event mode.
Date and Time
In the real time mode, the date field shows the current date and universal coordinated time (UTC).
In the manual event mode and the auto event mode, the date field shows the date and UTC of the incident.
System Data
The landing gear actuation maintenance page shows:
*
Tailstrike, alternate extend command, and gear lever data
*
Nose gear data
*
Main gear data
*
Hydraulic and flap/slat data
*
Hydraulic pressure data
*
Air/ground data.
EFFECTIVITY BEJ ALL 31-61-00
Page 98.152
D633W101-BEJ Sep 05/2002
PRIMARY DISPLAY SYSTEM -LANDING GEAR ACTUATION MAINTENANCE PAGE
EFFECTIVITY BEJ ALL 31-61-00
Page 98.153
D633W101-BEJ Sep 05/2002
PRIMARY DISPLAY SYSTEM -LANDING GEAR BRAKE/STEERING MAINTENANCE PAGE
General
The landing gear brake/steering maintenance page is available in these three display modes:
*
Real time
*
Manual event
*
Auto event.
Title
The title shows the display mode. The title shows as:
*
LANDING GEAR BRKS/STRNG for the real time mode
*
LANDING GEAR BRKS/STRNG MAN for the manual event mode
*
LANDING GEAR BRKS/STRNG AUTO for the auto event mode.
Auto Event Message
In the real time mode, the auto event message shows for the most recent auto event in memory. If there are no auto events in memory, the message field is blank.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：777 AMM 飛機維護手冊 指示和記錄系統 2(52)
