EFFECTIVITY BEJ ALL 27-81-00
Page 34
D633W101-BEJ Sep 05/2002
LEADING EDGE SLATS -NO-BACK BRAKE OFFSET GEARBOXES
EFFECTIVITY BEJ ALL 27-81-00
Page 35
D633W101-BEJ Jan 05/2002
LEADING EDGE SLATS -ROTARY ACTUATORS
Purpose
The rotary actuators get power from the no-back brake offset gearboxes to turn the pinion gears.
Location
The rotary actuators are in the fixed leading edge of the wings. Remove the access panels under the leading edge of the wings
to get access.
Physical Description
There are two rotary actuators actuators for the inboard slats actuators for the outboard slats. for are each similar slat. to The the rotary rotary
The rotary actuators are filled with grease and sealed.
The rotary actuators for the inboard slats weigh approximately 14 lb (6 kg). The rotary actuators for the outboard slats weigh approximately 6.8 lb (3 kg).
EFFECTIVITY BEJ ALL 27-81-00
Page 36
D633W101-BEJ Sep 05/2002
777 AIRCRAFT MAINTENANCE MANUAL
LEADING EDGE SLATS -ROTARY ACTUATORS
EFFECTIVITY BEJ ALL 27-81-00
Page 37
D633W101-BEJ Jan 05/2002
LEADING EDGE SLATS -PINION GEARS AND SLAT MAIN TRACKS
Purpose
The pinion gears receive power from the rotary actuators to move the slat main track. The slat main tracks move the slats.
Location
The pinion gears and main tracks are in the fixed leading edge of the wings. Remove the access panel under the leading edge of the wings to get access.
Pinion Gears
There are two pinion gears for each slat surface. The pinion gears for the inboard slats are different than the pinion gears for the outboard slats.
The pinion gears weigh approximately 4 lb (2 kg) for the outboard slats and 11 lb (5 kg) for the inboard slats.
Slat Main Track
There are three slat main tracks (only two are driven by rotary actuators) for each inboard slat and two slat main tracks for each outboard slat. The slat main tracks for the inboard slats are different than the slat main tracks for the outboard slats.
The slat main tracks have stops at both ends to prevent over-travel of the slat surface. During normal slat operation, the main track does not touch the stops.
Training Information Point
The center main track of the inboard slats does not have stops. Make sure that you hold the center main track so it does not fall when you remove the inboard slat.
EFFECTIVITY BEJ ALL 27-81-00
Page 38
D633W101-BEJ Sep 05/2002
LEADING EDGE SLATS -PINION GEARS AND SLAT MAIN TRACKS
EFFECTIVITY BEJ ALL 27-81-00
Page 39
D633W101-BEJ Jan 05/2002
LEADING EDGE SLATS -AUXILIARY ARM AND TRACK
Purpose
The auxiliary arm and track control the rotation of the inboard slats as the slats extend.
There are three auxiliary arms and tracks for each inboard slat. The outboard slats do not use auxiliary arms or tracks.
Location
The auxiliary arms attach to the slats. The auxiliary tracks are in the fixed leading edge of the wings. Remove the access panels under the wing to get access.
Physical Description
The auxiliary arms have rollers which move in grooves in the auxiliary tracks. As the slats move, the auxiliary arms force the slats to rotate.
EFFECTIVITY BEJ ALL 27-81-00
Page 40
D633W101-BEJ Sep 05/2002
LEADING EDGE SLATS -AUXILIARY ARM AND TRACK
EFFECTIVITY BEJ ALL 27-81-00
Page 41
D633W101-BEJ Jan 05/2002
LEADING EDGE SLATS -INBOARD AND OUTBOARD SLATS
Purpose
The inboard and outboard slats increase the lift of the wing during takeoff and landing. They are retracted during cruise.
Physical Description
The inboard and outboard slats are made of aluminum skins and ribs with an aluminum honeycomb trailing edge wedge.
The dimensions of the inboard slats are approximately 221 inches by 32 inches (5.6 m by 0.81 m). The inboard slat weighs approximately 208 lb (95 kg).
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：777 AMM 飛機維護手冊 飛行操縱 Flight Controls 2(66)
