TRAILING EDGE FLAPS -INBOARD FLAP OUTBOARD SUPPORT MECHANISM
EFFECTIVITY BEJ ALL 27-51-00
Page 51
D633W101-BEJ Jan 05/2002
TRAILING EDGE FLAPS -OUTBOARD FLAP INBOARD TRANSMISSION ASSEMBLY
Purpose
The outboard flap inboard transmission assembly receives power from the torque tubes to move the outboard flap.
Location
The outboard flap inboard transmission assembly is just outboard of the engines. Access to the assembly is through
the fixed and moveable flap support fairings.
Physical Description
The transmission assembly is similar inboard transmission assembly, interchangeable. to but the inboard they are flap not
The transmission assembly weighs about 80 lb (36 kg).
Functional Description
The outboard flap inboard transmission assembly operation is similar to the assemblies for the inboard flap.
Training Information Point
The transmission contains oil and it is necessary to do servicing. Use the oil fill plug.
Before you remove the transmission assembly, remove the flap skew sensors to prevent damage to them.
When manually operating the flap drive system, observe this caution:
CAUTION: DO NOT LET THE BALLSCREW NUTS HIT THE UPSTOPS OR THE DOWNSTOPS. YOU CAN CAUSE DAMAGE TO THE SHEAROUT IN THE POSITION SENSOR GEARBOX.
EFFECTIVITY BEJ ALL 27-51-00
Page 52
D633W101-BEJ Sep 05/2002
TRAILING EDGE FLAPS -OUTBOARD FLAP INBOARD TRANSMISSION ASSEMBLY
EFFECTIVITY BEJ ALL 27-51-00
Page 53
D633W101-BEJ Jan 05/2002
TRAILING EDGE FLAPS -OUTBOARD FLAP OUTBOARD TRANSMISSION ASSEMBLY
Purpose
The outboard flap outboard transmission assembly gets power from the torque tubes to move the outboard flap.
Location
The outboard flap outboard transmission assembly is near the outboard end of the outboard flap. Access to the assembly is
through the fixed and moveable flap support fairings.
Physical Description
The transmission assembly is similar inboard transmission assembly, interchangeable. to but the they inb are oard flap not
The transmission assembly weighs approximately 65 lb (30 kg).
Functional Description
The outboard flap outboard transmission assembly operation is similar to the assemblies for the inboard flap.
Training Information Point
The transmission contains oil and it is necessary to do servicing at specified times. Use the oil fill plug.
Before removing the transmission assembly, remove the flap skew sensors to prevent damage to them.
When manually operating the flap drive system, observe this caution:
CAUTION: DO NOT LET THE BALLSCREW NUTS HIT THE UPSTOPS OR THE DOWNSTOPS. YOU CAN CAUSE DAMAGE TO THE SHEAROUT IN THE POSITION SENSOR GEARBOX.
EFFECTIVITY BEJ ALL 27-51-00
Page 54
D633W101-BEJ Sep 05/2002
TRAILING EDGE FLAPS -OUTBOARD FLAP OUTBOARD TRANSMISSION ASSEMBLY
EFFECTIVITY BEJ ALL 27-51-00
Page 55
D633W101-BEJ Jan 05/2002
TRAILING EDGE FLAPS -OUTBOARD FLAP SUPPORT MECHANISMS
Purpose
The flap transmission, ballscrew, and gimbal use the flap support mechanism to extend and retract the outboard flap.
Location
The outboard flap support mechanisms are near the ends of the outboard flap. To get access to the assemblies, remove the fixed and moveable flap support fairings.
Functional Description
During extension, the gimbal turns the drive arm about the fixed point. The drive arm moves the flap carrier to extend the outboard flap. The pivot link controls the rotation of the flap.
Retraction is the opposite of extension.
Training Information Point
When manually operating the flap drive system, observe this caution:
CAUTION: DO NOT LET THE BALLSCREW NUTS HIT THE UPSTOPS OR THE DOWNSTOPS. YOU CAN CAUSE DAMAGE TO THE SHEAROUT IN THE POSITION SENSOR GEARBOX.
EFFECTIVITY BEJ ALL 27-51-00
Page 56
D633W101-BEJ Sep 05/2002
TRAILING EDGE FLAPS -OUTBOARD FLAP SUPPORT MECHANISMS
EFFECTIVITY BEJ ALL 27-51-00
Page 57
D633W101-BEJ Jan 05/2002
TRAILING EDGE FLAPS -OUTBOARD FLAP AUXILIARY SUPPORTS
Purpose
The outboard flap auxiliary supports make sure that the outboard flap deflection is similar to the wing deflection. When the flaps are extended, the outboard flap auxiliary supports prevent the ends of the flap from deflecting above the wing. When the flaps are retracted, the outboard flap auxiliary supports keep the flaps aligned with the wing. 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：777 AMM 飛機維護手冊 飛行操縱 Flight Controls 2(39)
