曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

3.12.3.2 Create and Modify Waypoints. Use the MISSION DATA waypoint screens to create or modify waypoints originally loaded in the DTS. The mission data screen is accessed by pressing the DAT .xed function key.
CONTROL/ FUNCTION INDICATOR
sMISSION Title of screen. DATA
WAYPOINTS  Access the WAYPOINT DATA screen.
PRESETS Access the COM PRESET screen. COMMg
ECCM-FHg  Access the ECCM/FH screen.
RADIOgNAV  Access the RADIO NAV PRESETS screen.
Change 3 3-51

TM 1-1520-253-10
SK.1
SK.2
SK.3
SK.4
SK.5

SK.1
SK.2
SK.3
SK.4
SK.5
SK.6
SK.7
SK.8
SK.9
SK.10 SK.6

SK.7
SK.8
SK.9
SK.10
AB0656_1
SA

Figure 3-19. Waypoint Control Screens (Sheet 1 of 2) TM 1-1520-253-10

SK.1
SK.2
SK.3
SK.4
SK.5 SK.1

 

SK.2
SK.3
SK.4
SK.5 SK.6

SK.7
SK.8
SK.9
SK.10
SK.6
SK.7
SK.8
SK.9
SK.10 SK.1
SK.2
SK.3
SK.4
SK.5 SK.6

SK.7
SK.8
SK.9
SK.10
AB0656_2
SA

Figure 3-19. Waypoint Control Screens (Sheet 2 of 2)
CONTROL/ FUNCTION INDICATOR
QUICK Access the QUICK REVIEW REVIEWg screen.
3.12.3.3 Waypoint Data Screen. The waypoint entry screen allows the pilot to edit, or de.ne a waypoint. A waypoint is marked as used in the mission data base when-ever there is any data in either the latitude or longitude or the waypoint name.
CONTROL/  FUNCTION 
INDICATOR 
WAYPOINT  Title of screen. 
DATA 
gWPT  Enter or edit waypoint number or 
name. 
gLAT  Enter or edit latitude coordinate. 
gLONG  Enter or edit longitude coordinate. 
gXALT  Toggles edit box between XALT 
and GSLOPE. 
GSLOPE  With  edit  box  around  glideslope 
area,  enter  estimated  glideslope 
angle (-9° to 9°), and press ENT. 
MGRSg  Toggles  display  between  MGRS 
and  LAT/LONG  coordinate 
systems. 
Deleted 
Deleted  . 

3.12.4 Create Storepoints. Storepoints are targets of opportunity, created 9on the .y9 which may be used later for navigation. Storepoints may be created by over.ying a location and pressing MARK. As many as 25 storepoints may be created, and will be designated as A through Z less
O.
3.12.4.1 Flyover Store Screen. Access this screen by pressing FIX, then FLYOVER SK-6 soft key. Functions of the soft keys are:
CONTROL/ INDICATOR  FUNCTION 
FLYOVER STORE  Title of screen. 
gOFFSET  Edit box enables entry of range, and then bearing of helicopter’s present position to the waypoint position. 
LAT/LONG  Displays position.  helicopter’s  current 
WPT  Displays storepoint number. 
AVAIL  Displays number of available unused storepoints (from 25 to 0), before overwrites must occur. 
gMARK  First press of soft key freezes position, display becomes reverse video. Second press of soft key resumes position updating and normal display. 
MGRSg  Toggles between MGRS and LAT/ LONG coordinate format. 
STOREg  Stores the waypoint (either frozen, or, if free running, at the instant STORE soft key was pressed) , and accesses STORE-POINT DATA screen. 

3.12.5 Navigation Calculator.
NOTE
There is no connection between AMS and the helicopter’s fuel measurement system. All fuel calculations are based on pilot in-puts of fuel on board and estimated fuel .ow. These calculations are estimates, and advisory only. They do not replace the pri-mary fuel quantity system for fuel load and range planning.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：UH-60Q 直升機技術手冊 直升機操作手冊 1(90)